Product Description
Toyota Camry 2007-2011 Sedan Stainless Wheel Well Accent Trim WQ27131, Full Length, 4 Pieces
WQ27131 is the Full Length four-piece polished stainless steel Wheel Well Accent Trim for the 2007-2011 Toyota Camry 4-door sedan. The note reads "Full Length", and the listing describes the set as "With 3M adhesive installation and black rubber gasket edging". The record gives no width.
Which Camry set to choose
WQ27131 sits alongside WQ27130, the version "Cut to fit with Rocker kit sold separately". The Full Length set carries no rocker-kit note. The record doesn't define how far the Full Length pieces reach; the photos show the shape. If you plan rocker trim, ask 877-752-3811 which of the two sets goes with it.
Rocker options on this Camry
TH27130 is an eight-piece kit at 2.25" spanning from the bottom of the door up; TH27131 is a two-piece On the rocker strip at 1.25" that installs below the door. Neither listing says which wheel well set it pairs with.
Material
The four full-length Camry pieces are polished 26 gauge 304 stainless steel from a USA shop, each edged in black rubber gasket and set over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime without harming the Toyota.
Cleaning the openings
Choose a calm day and work in shade. Each arch gets soap, a rinse and a towel, then time to dry fully. After that comes a careful look: on this age of Camry, check for stone chips and remnants of earlier adhesive along the band the pieces will cover, and fix or remove them. A pass of wax-and-grease remover follows. The isopropyl alcohol wipe waits until the piece is ready.
Bonding the Full Length pieces
Start with a front corner. Hold the piece up on its liner and use painter's tape at each end to keep it still while you check both ends against the photos. Run a fingertip along the gasket to feel it seated against the opening. Peel from the top of the arch outwards in short lengths if that suits the shape, or from one end, pressing firmly behind the liner. Then do the matching front corner and compare.
Camry group
Pillar sets PP27130 (4) and PP27131 (6), a two-piece 0.563" roof insert, a rear bumper accent at 2.125", a rear deck accent, a license bar, a license plate bezel and a gas door cover are also linked.
Care
When the box comes, check that all four pieces are there. Once fitted, let a day pass before washing, use mild soap and a soft cloth, and keep pressure-washer spray off the gasket. Call 877-752-3811 with questions.
Checks before ordering
Confirm three things before buying WQ27131: a model year from 2007 to 2011, the 4-door sedan body, and whether you will fit rocker trim. If you will, the call to 877-752-3811 decides between this set and the cut version. If you won't, the Full Length set is the one listed without the rocker note. Check each gasket edge for transit damage when the box arrives.
Four 2007-2011 Camry pieces under WQ27131 (UPC 691821693405). Ring 877-752-3811.
WQ27131 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ27131 |
| UPC | 691821693405 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Full Length |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
Fitment: WQ27131
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- GC27130: 1-piece Gas Door Cover Trim
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RB27130: 1-piece Rear Bumper Trim Accent
- RD27130: 1-piece Rear Deck Accent
- RI27130: 2-piece Roof Insert Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ27131 Wheel Well Accent Trim
Which Camry does WQ27131 fit?
The 2007-2011 Toyota Camry 4-door sedan.
What does "Full Length" mean?
The record doesn't define it; it's the version without the rocker-kit cut. See the photos.
How many pieces?
Four, with black rubber gasket edging.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
