Product Description
Toyota Camry 2012-2014 Sedan Stainless Wheel Well Accent Trim WQ12130, 4 Pieces, 0.875" Wide
WQ12130 is the Wheel Well Accent Trim for the 2012-2014 Toyota Camry 4-door sedan: four pieces of polished stainless steel, 0.875" wide, described as "With 3M adhesive installation and black rubber gasket edging".
Years and body
The fitment is narrow: the Camry sedan, 2012-2014. Anything outside those years isn't covered by this listing. If you have a Camry from just before or after that range, call 877-752-3811 before ordering.
0.875" and a rubber edge
Each of the four is 0.875" wide, with black rubber gasket edging on the side that meets the wheel opening. The photos show which piece goes on which corner; the record doesn't list it.
Steel and tape
The four 0.875" Camry arch strips are cut in the USA from polished 26 gauge 304 stainless steel and set over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, that tape will hold for a lifetime with no harm to the 2012-2014 Toyota.
Arches first, then trim
Before anything is peeled, wash and dry each wheel opening and look closely where the stainless will sit. Old adhesive, wax and flaking paint all need to come off. At the moment each piece is ready, wipe its strip with a wax-and-grease remover, then isopropyl alcohol.
Fitting the four corners
Mark each liner with its corner from the photos. Hold the first piece in place with the liner attached, tab the ends with painter's tape, and check that the gasket hugs the opening the whole way along. Peel back an inch, press the end down, then continue around the arch, seating the gasket as you press. Do the next opening and compare the two before moving on.
Choosing other Camry parts
Several parts in this group come in pairs, so read the notes:
- Door handle accents: DH12130 (8 pieces) and DH12131 (4) without a smart key note, and DH12132 (8) and DH12133 (4) "Includes smart key access".
- Front grille accents: SG12130 at 1.875" ("Lower Airdam, wide") and SG12131 at 1" ("Lower Airdam, narrow").
- Pillar sets PP12130 (4) and PP12131 (6).
Also linked: a gas door cover, a license bar above-plate accent, a license plate bezel, a two-piece mirror cover set ("Top Half only"), a rear deck accent at 1.25" and a two-piece roof insert at 0.5" x 54.5".
Care
Skip washing for a day, then use mild soap and a soft cloth, and keep pressure-washer spray away from the gasket. Fit questions go to 877-752-3811.
Before ordering
Check the photos to see whether the 0.875" band suits your Camry. If you're also buying a grille accent, decide between the wide and narrow airdam versions at the same time, so the front and sides are planned together.
On arrival
Count the four pieces against the photos while the liners are still on. Pick a dry, mild day for fitting, and keep the stainless in the shade until each piece goes on. If one is missing, call 877-752-3811.
Camry owners after the 0.875-inch set can order WQ12130, UPC 691821692613, and call 877-752-3811 with questions.
WQ12130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ12130 |
| UPC | 691821692613 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.875" |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2014 Toyota Camry |
Fitment: WQ12130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2012-2014 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2014 Toyota Camry
- DH12130: 8-piece Door Handle Accent Trim
- DH12131: 4-piece Door Handle Accent Trim
- DH12132: 8-piece Door Handle Accent Trim
- DH12133: 4-piece Door Handle Accent Trim
- GC12130: 1-piece Gas Door Cover Trim
- LB12130: 1-piece License Bar, Above plate accent Trim
- LP12130: 1-piece License Plate Bezel
- MC12130: 2-piece Mirror Cover Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ12130 Wheel Well Accent Trim
Which car does WQ12130 fit?
The 2012-2014 Toyota Camry 4-door sedan.
How wide is it?
0.875".
How many pieces?
Four, with black rubber gasket edging.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
