Product Description
Toyota Camry 2007-2011 Sedan Stainless Wheel Well Accent Trim WQ27130, Cut to Fit with Rocker Kit, 4 Pieces
WQ27130 is a four-piece polished stainless steel Wheel Well Accent Trim for the 2007-2011 Toyota Camry 4-door sedan. Its note reads "Cut to fit with Rocker kit sold separately", and the listing describes it as "With 3M adhesive installation and black rubber gasket edging". No width is listed.
Cut version and Full Length version
This Camry has two wheel well sets. WQ27130 is the one cut to fit with a rocker kit; WQ27131 is noted "Full Length". The record doesn't explain the difference in shape, so compare the photos. If you're not fitting rocker trim, WQ27131 is the set listed without the cut.
Which rocker kit?
Two rocker kits are linked for this car: TH27130, eight pieces at 2.25" that span from the bottom of the door up, and TH27131, a two-piece On the rocker strip at 1.25" that installs below the door. The note on WQ27130 doesn't name either one. Call 877-752-3811 before ordering to confirm which kit this set is cut to meet.
Material
The four Camry pieces are polished 26 gauge 304 stainless steel cut by QAA in the USA, finished with black rubber gasket edging and fitted over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the sedan.
Job order
The rocker kit goes on first. With it fitted, each cut end of the arch trim can be checked against it while the liner is still on.
Preparing the paint
Paint on a 2007-2011 Camry has had years of use, so inspect it rather than assume it's ready. Wash and dry each opening, then go along the band the stainless will cover, near the rocker trim especially. Clear old adhesive and wax; repair any loose edge. Wax-and-grease remover across the band, and an isopropyl alcohol wipe just before each piece.
Fitting against the rocker trim
Place each piece with its liner on, held by painter's tape. Check the gasket along the opening and the cut end beside the rocker trim, comparing both with the photos. When they match, start peeling at the end furthest from the rocker trim and work toward it, pressing firmly, so the cut end is set last and exactly where you placed it.
Camry group
Also linked: pillar sets PP27130 (4) and PP27131 (6), a two-piece roof insert at 0.563", a 2.125" rear bumper accent, a rear deck accent, a license bar, a license plate bezel and a gas door cover.
Care
On arrival, check that all four pieces are there. Give the trim a day after fitting before a wash, then use mild soap and a soft cloth, keeping any pressure washer off the gasket. If the photos leave anything unclear, we can talk it through by phone.
Keep each liner on until its cut end has been held against the fitted rocker trim, and don't trim the stainless yourself; if a cut end and the rocker trim don't line up as the photos show, phone 877-752-3811 with SKU WQ27130 and the rocker part number you fitted.
The Camry kit is WQ27130 with UPC 691821369584; our number is 877-752-3811.
WQ27130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ27130 |
| UPC | 691821369584 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Cut to fit with Rocker kit sold separately |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Toyota Camry |
Fitment: WQ27130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2007-2011 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Toyota Camry
- GC27130: 1-piece Gas Door Cover Trim
- LB27130: 1-piece License Bar, Above plate accent Trim
- LP27130: 1-piece License Plate Bezel
- PP27130: 4-piece Pillar Post Trim
- PP27131: 6-piece Pillar Post Trim
- RB27130: 1-piece Rear Bumper Trim Accent
- RD27130: 1-piece Rear Deck Accent
- RI27130: 2-piece Roof Insert Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ27130 Wheel Well Accent Trim
Which Camry does WQ27130 fit?
The 2007-2011 Toyota Camry 4-door sedan.
Which rocker kit is it cut for?
The note doesn't say. Call 877-752-3811 before ordering.
Is there a version without the cut?
Yes, WQ27131, noted "Full Length".
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
