Product Description
Toyota Camry 2012-2014 Lower Door Trim, 1" With Trim Crease, Four Pieces (TH12130)
TH12130 fits the 2012, 2013 and 2014 Toyota Camry sedan. It's a four-piece Lower Kit in polished stainless steel, 1" wide, and the width bullet also says "with trim crease." Placement is "On the doors only, spans from the bottom of the door UP to the specified width," so each piece runs along the bottom edge of a door and rises one inch.
A short window of years
Three model years are listed. If your Camry is from just before or just after that range, this listing does not cover it; check the year on your registration before ordering.
The trim crease
The bullet says the pieces are made "with trim crease," meaning a bend is formed into the steel. The data doesn't describe where the crease falls on each piece. The photos show the profile. When you dry-fit, the crease should sit naturally against the door without rocking; if it doesn't, rotate the piece or try another door.
Rocker panel parts for this Camry
This is the rocker panel trim QAA links on this Camry sheet; no below-the-door rocker strip appears alongside it. For something lower on the body, call Quality Automotive Trims to ask.
Specs at a glance
- Lower Kit of four pieces
- Camry fit: 1" wide, trim crease doors
- On the doors only
- USA-made from high-quality polished 304 stainless, 26 gauge
- Each Camry piece bonds with 3M automotive-grade acrylic foam tape
Tape
The four Camry door pieces install directly over the existing surface. QAA says that 3M tape will hold for a lifetime without harming the Toyota.
Prep
Wash the lower doors and dry them, then wipe the bottom couple of inches with isopropyl alcohol. Make sure no wax or protectant is left along the edge.
Putting it on
Set each piece against the bottom of its door with the liner still on. Check the crease, check clearance by gently closing the door, and look down the side of the car to see that front and rear pieces line up. Then peel a little liner, anchor one end and press along the length.
Four doors, four pieces
The kit has four pieces for this four-door sedan. The listing doesn't label them by door, so match each piece's length and shape to a door during the dry fit and mark it with painter's tape.
Timing
Choose a mild, dry day. Skip washing for roughly a day afterward.
The rest of the Camry list
QAA links a long set of parts for this sedan: PP12130 and PP12131 pillars; DH12130, DH12131, DH12132 and DH12133 door handle accents (the last two include smart key access); MC12130 top-half mirror covers; RI12130 roof inserts, 0.5" by 54.5"; SG12130 wide and SG12131 narrow lower airdam grille accents, 1.875" and 1"; RD12130 deck accent w1.25; LB12130 license bar; LP12130 plate bezel; and GC12130 gas door cover. Check each listing for its finish.
Care
Rinse the lower doors after salty roads. Mild soap and a non-abrasive polish keep the steel bright.
2012-2014 Camry kit TH12130, UPC 691821621996: Quality Automotive Trims, 877-752-3811.
TH12130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH12130 |
| UPC | 691821621996 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Coverage / notes | With trim crease; On the doors only, spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2014 Toyota Camry |
Fitment: TH12130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2012-2014 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2014 Toyota Camry
- DH12130: 8-piece Door Handle Accent Trim
- DH12131: 4-piece Door Handle Accent Trim
- DH12132: 8-piece Door Handle Accent Trim
- DH12133: 4-piece Door Handle Accent Trim
- GC12130: 1-piece Gas Door Cover Trim
- LB12130: 1-piece License Bar, Above plate accent Trim
- LP12130: 1-piece License Plate Bezel
- MC12130: 2-piece Mirror Cover Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH12130 Rocker Panel Trim, Lower Kit
Where does TH12130 go?
On the doors only, from the bottom of each door up 1".
What does "with trim crease" mean?
The pieces have a bend formed into them. The photos show the profile.
Which Camry years fit?
2012, 2013 and 2014 sedan.
Is there a matching rocker strip for below the doors?
None is linked on this sheet. Call 877-752-3811 to ask.
How is it installed?
With 3M automotive-grade acrylic foam tape over the existing surface.
