Product Description
Toyota Camry 2025-2026 Rear Deck Accent, Polished Stainless (RD75130)
Only two model years are on this record: RD75130 fits the Toyota Camry 4-door sedan for 2025 and 2026. Earlier Camrys are on other listings, so the year is the deciding fact here.
Check the year before anything else
Your registration or the label in the door jamb shows the model year. If it's earlier than 2025, this listing doesn't cover your car; call Quality Automotive Trims at 877-752-3811 and they'll point you to the right one.
The strip
A single piece of 26-gauge 304 stainless steel, mirror-polished, made in the USA. It goes across the trunk lid and installs over the existing surface on 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
No width listed
The data leaves out width and length. Use the photos to see how it relates to the lid's edges and badge, or ask for a measurement by phone.
Camry parts in the same record
One linked part names its material outright: LB75130, described as a one-piece stainless steel license bar bezel. Pairing it with this strip puts two pieces of trim at the rear, one on the lid and one at the plate.
The others are GC75130, a gas door cover trim; AT75130, a fourteen-piece body side molding accent at 0.75 inch; and four pillar kits, PP75130, PP75131, PP75132, and PP75133, in four, six, eight, and ten pieces. Check those listings for their finish.
Strip first, bar second
If you're installing the license bar too, put this strip on first and measure the bar's position from it. The rear will look planned instead of approximated.
Fourteen pieces down the side
AT75130 is a large kit at fourteen pieces. If you're considering it alongside the trunk accent, compare the photos to see how the side and rear lines relate.
Preparing the lid
Wash and dry. Wipe the footprint with a residue-free cleaner, changing cloths until one stays clean. On a newer car, any dealer-applied sealant or coating on the trunk should be removed under the tape area, since tape bonds best to clean clearcoat.
Applying it
Dry-fit with the liner on and line it up to the photos. Measure from each end to the lid edges, adjust until equal, and mark the top edge with painter's tape. Peel and press from the middle out. A dry, mild day is ideal. The Installation tab has the full steps.
Upkeep
No washing for a few days, then mild soap and a soft cloth. Avoid abrasive pads. Polished 304 has no plated coat, so light scuffs show more of the same steel.
Light and timing
A polished strip reflects its surroundings, so judging level in direct sun is harder than it sounds. Set it up in a garage or on an overcast day, and step back to the end of the car after each adjustment before you commit.
What to expect
It's decorative trim. It doesn't replace any factory part, and the trunk opens as before.
Reference
Camry 2025-2026: RD75130, UPC 840251605278. Dial 877-752-3811 to reach Quality Automotive Trims.
RD75130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD75130 |
| UPC | 840251605278 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2025-2026 Toyota Camry |
Fitment: RD75130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2025-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2025-2026 Toyota Camry
- PP75130: 4-piece Pillar Post Trim
- PP75131: 6-piece Pillar Post Trim
- PP75132: 8-piece Pillar Post Trim
- PP75133: 10-piece Pillar Post Trim
- AT75130: 14-piece Body Side Molding Accent Trim
- LB75130: 1-piece Stainless Steel License Bar Bezel
- GC75130: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD75130 Rear Deck Accent
Does RD75130 fit an earlier Camry?
No. The record lists only the 2025 and 2026 Toyota Camry 4-door sedan. Call 877-752-3811 for earlier years.
How wide is it?
No width is listed. Check the photos or call for a measurement.
Is there a license bar?
Yes, LB75130, a one-piece stainless steel license bar bezel.
How many pillar kits are linked?
Four: PP75130, PP75131, PP75132, and PP75133, in four, six, eight, and ten pieces.
How does it mount?
3M tape over the existing surface.
