Product Description
Six Mirror-Polished Pillar Covers for the 2025-2026 Camry Sedan (PP75131)
PP75131 gives the 4-door Toyota Camry sedan six pillar covers of polished 304 stainless steel. It is listed for model years 2025 and 2026, made in the USA, and mounts with 3M tape.
One step above the starter
Camry pillar kits come in four sizes. Four pieces (PP75130) is the lightest; this six-piece kit is next, followed by eight (PP75132) and ten (PP75133). Because QAA's data carries no coverage note for any of them, it does not say which posts the six pieces cover. Lay the photos side by side to see the difference, or call and ask.
What six pieces get you
More bright metal along the window line than the four-piece kit, without reaching for the largest sets. It is a sensible middle ground for owners who want the trim noticed but not dominant.
Specs
- Six pieces
- 304 stainless steel, 26 gauge
- Mirror polish
- Six-piece Camry set made in the USA
- Attached by 3M automotive-grade acrylic foam tape
- UPC 840251605223
Tape mounting
The covers go on over the existing surface. There is nothing to unbolt, and the original pillars remain intact underneath. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Installing six covers
On a dry day with mild temperatures, wash the pillars and dry them fully. Remove wax with a residue-free wipe so the tape bonds to paint. Match the six Camry covers to the photos. Dry-fit each one with the backing on; when it matches the photos, peel and press firmly along the full length. Fit the first cover, look along the sedan from front and rear, and set the others to match it. Avoid washing for a few days. See the Installation tab for every step.
Model years
The Camry listing covers 2025 and 2026 only. If your sedan is older, call before ordering. The Fitment tab has the record.
Why solid stainless
With no plating, there is no thin bright layer to wear through. The six covers share one consistent mirror finish.
More polish
The same Camry has an AT75130 body side molding accent kit, an LB75130 license bar bezel, an RD75130 rear deck accent, and a GC75130 gas door cover in QAA's catalog, all sold separately.
Looking after it
Rinse, wash with mild soap, then dry with microfiber; no scouring pads or gritty polish.
Handling
Keep the covers on a soft towel while you work, and do not touch the adhesive once the liner is off.
Six or eight?
If you are torn between this kit and the eight-piece PP75132, think about how much bright trim you want to see from the side. Six is the more restrained of the two. Each Camry kit is a complete set on its own, so two pieces cannot be bought separately later; decide before ordering. If you are shopping for someone else, confirm the model year with them first, since the fitment is limited to two years.
Questions
For six-piece Camry kit PP75131, phone Quality Automotive Trims at 877-752-3811.
PP75131 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP75131 |
| UPC | 840251605223 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2025-2026 Toyota Camry |
Fitment: PP75131
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2025-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2025-2026 Toyota Camry
- PP75130: 4-piece Pillar Post Trim
- PP75132: 8-piece Pillar Post Trim
- PP75133: 10-piece Pillar Post Trim
- AT75130: 14-piece Body Side Molding Accent Trim
- LB75130: 1-piece Stainless Steel License Bar Bezel
- RD75130: 1-piece Rear Deck Accent
- GC75130: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP75131 Pillar Post Trim
What does PP75131 fit?
The 4-door Toyota Camry sedan, model years 2025-2026.
How does it compare with the other Camry kits?
It has six pieces. The others have four, eight, and ten. The catalog does not give coverage notes for them.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is the material?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Will it fit an older Camry?
The listing covers 2025-2026 only. Please call for other years.
Phone number?
Quality Automotive Trims, 877-752-3811.
