Product Description
Toyota Camry 2025-2026 Stainless Steel License Bar Bezel (LB75130)
LB75130 is listed under its own part name: Stainless Steel License Bar Bezel. It's a single piece of polished stainless steel for the Toyota Camry 4-door sedan, model years 2025 and 2026. Two model years, one row, no trim exclusions.
Bar, bezel, or both?
The name combines two terms. A license bar usually sits above the plate; a bezel usually frames it. The catalog doesn't define how this part combines them, what it surrounds, or its dimensions. We won't guess. The product photos show its shape and how it sits around the plate area, so they're your guide. Compare them closely with the trunk of your Camry. If anything looks different, call Quality Automotive Trims at 877-752-3811 and mention LB75130 before ordering.
Material and attachment
The 2025-2026 Camry bar is mirror-polished 26-gauge 304 stainless, made in the USA, and goes on with 3M automotive-grade acrylic foam tape over the existing surface without drilling. QAA says the tape will hold for a lifetime with no damage to the sedan's surface.
Confirm the year
The listing covers 2025 and 2026 only. The Camry row is short, so check your year falls inside it. A Camry from an earlier year isn't on this listing.
Installing
Even a new car needs prep. Wash the area, rinse, dry, then wipe with rubbing alcohol to remove any wax, transport film residue or fingerprints. Check for dealer sticker residue and clear it. Hold the part in place with the liner on, matching the photos. Measure to fixed points at both ends of the trunk panel so it's centered, and check that it's level from behind the Camry. Mark the ends with painter's tape. Peel the liner, align, and press firmly all the way around. Remove the marks and press again. Close the trunk gently for the first day. The Installation tab gives the temperature range.
Other Camry parts
Seven related parts are cross-listed. PP75130, PP75131, PP75132 and PP75133 are pillar post kits of four, six, eight and ten pieces. AT75130 is a fourteen-piece body side molding accent kit at 0.75". RD75130 is a one-piece part cataloged as Rear Deck Accent. GC75130 is a one-piece gas door cover trim. RD75130 and this part both work at the back of the car, so compare their photos side by side if you're considering both. Check each listing's photos for finish.
Why start here
A single part at the back is an easy way to see polished stainless on your Camry's paint. Hold it in place, liner on, in daylight before committing to the larger kits.
Reading the photos
Because the part name doesn't settle whether this sits above the plate, around it, or both, spend a moment on the photos. Note where the edges fall relative to the plate and any emblem nearby, then compare that with your own trunk from the same angle.
Care
Wash with mild soap and water and dry with a soft cloth. Avoid abrasives, which scratch a mirror polish. The Fitment and Specs tabs repeat the row and the UPC.
LB75130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB75130 |
| UPC | 840251605261 |
| Part type | Stainless Steel License Bar Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2025-2026 Toyota Camry |
Fitment: LB75130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2025-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2025-2026 Toyota Camry
- PP75130: 4-piece Pillar Post Trim
- PP75131: 6-piece Pillar Post Trim
- PP75132: 8-piece Pillar Post Trim
- PP75133: 10-piece Pillar Post Trim
- AT75130: 14-piece Body Side Molding Accent Trim
- RD75130: 1-piece Rear Deck Accent
- GC75130: 1-piece Gas Door Cover Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Stainless Steel License Bar Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB75130 Stainless Steel License Bar Bezel
Is LB75130 a bar or a bezel?
It's cataloged as a Stainless Steel License Bar Bezel. The photos show its shape; call 877-752-3811 with questions.
Which Camry years does it fit?
2025 and 2026, 4-door sedan.
How many pieces?
One.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Is a width listed?
No.
