Product Description
Six Mirror-Polished Pillar Covers for the 1992-1996 Camry 4-Door (PP96131)
PP96131 is the bigger pillar kit QAA catalogs for the Toyota Camry 4-door sedan from 1992 to 1996. It includes six covers in polished 304 stainless steel, made in the USA, mounting with 3M tape. PP96131 is the six-piece companion to the four-piece PP96130 for the same Camry sedan.
Six instead of four
The smaller option for this Camry is PP96130, with four pieces. Owners who want the most bright trim around the side glass usually reach for the larger count. The catalog has no coverage note for either kit, so it does not say where the two further covers sit. The product photos make the comparison easier, and a call clears up the rest.
At a glance
- Fits the 1992-1996 Toyota Camry sedan with four doors
- Six covers for the Camry pillars
- Mirror-polished 304 stainless, 26 gauge
- The Camry set is manufactured in America
- Each Camry cover grips with 3M automotive-grade acrylic foam tape
- UPC 691821448463
Rockers for the same Camry
QAA also lists TH92132, an eight-piece rocker panel full kit for this sedan, noted as spanning from the bottom of the molding to the bottom of the door. Some owners order both; check the rocker listing for its finish first.
No permanent changes
These covers fit over the existing pillar surface. No trim is removed. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Why polished stainless
The mirror finish is polished into the steel itself. There is no chrome layer to flake off, and all six covers stay matched.
Ready the surface
After a wash and a full dry, wipe the pillars with a wax-free cleaner so the tape meets bare paint. Thirty-year-old paint can be fragile, so check for lifting spots and repair them before going ahead.
Six-piece fitting order
- Match the six covers to the Camry pillars using the photos.
- Dry-fit each with the liner on and note its place.
- Peel one liner at a time and align with the door frame.
- Push each Camry cover down firmly along its length.
- Fit a cover, check it, then do the next.
- Give the Camry a few days before washing.
See the Installation tab for the complete guide.
Taking care of it
A hand wash with mild soap and a soft towel is all it needs. Avoid scouring pads.
What pillar posts are
They are the upright body sections around the door glass. Covering them in polished steel gives the side of the car a cleaner, brighter outline.
Handle with care
Keep the six covers on a clean towel until each goes on, and hold them by the edges so the adhesive stays free of fingerprints and dust.
Check your year
The listing runs from 1992 to 1996 only. If your Camry is newer or older, or is not the 4-door sedan, look at the Fitment tab or call before ordering so you get a kit cataloged for your car.
Call us
Quality Automotive Trims, 877-752-3811. Mention SKU PP96131 and the year of your Camry, and we can help you decide whether six pieces or the four-piece set is the better fit.
PP96131 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP96131 |
| UPC | 691821448463 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1996 Toyota Camry |
Fitment: PP96131
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 1992-1996 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1996 Toyota Camry
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP96131 Pillar Post Trim
Will PP96131 fit my Camry?
It is listed for the 4-door Camry sedan, 1992 through 1996.
How many pieces?
Six. The four-piece kit is PP96130.
Is the position of the last two covers listed?
The catalog data does not say. Compare the photos or call 877-752-3811.
Is it chrome?
It is mirror-polished 304 stainless steel, not plated, and made in the USA.
Is there a matching rocker kit?
QAA lists TH92132, an eight-piece rocker panel kit for the same sedan.
