Product Description
Toyota 4Runner 2010-2024 Stainless License Plate Bezel (LP10177)
Fifteen model years on one part number. LP10177 is listed for the Toyota 4Runner 4-door SUV from 2010 through 2024, a long run for a single listing, and it doesn't carry any trim exclusions. It's a one-piece license plate bezel in polished stainless steel, the kind of trim that frames the area around the rear plate.
Built from
26-gauge 304 stainless steel, polished to a mirror finish, made in the USA. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface; no drilling or hardware. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
A long range means a careful look
Fifteen years is a wide span, and the catalog gives no dimensions and no notes about cutouts for a camera or lights. That makes the product photos important. Look at the plate area of your own 4Runner and compare it with the photos, whatever its year. If anything about your liftgate differs, call Quality Automotive Trims at 877-752-3811 and mention LP10177 before ordering.
Install
Take the plate off. Wash the plate area thoroughly, including the corners, then rinse and dry. Wipe with rubbing alcohol until a fresh cloth stays clean. Check the paint for chips, worn clear coat or adhesive from an old plate frame or sticker, especially on a 4Runner from the early part of the range. Hold the bezel in place, liner on, and look from behind: even margins on all sides and level edges. Mark reference points with painter's tape. Peel the liner, line up, and press firmly all around the frame. Press again, refit the plate, and close the liftgate gently for the first day. The Installation tab gives the temperature range.
Related 4Runner parts
Eight other parts are cross-listed. DH10177 is an eight-piece door handle cover kit. GC10178 is a one-piece gas door cover trim. PP10177 and PP10178 are pillar post kits of four and six pieces. RD10177 is a one-piece part cataloged as Rear Deck Accent at 1.375". WP10177 is a fourteen-piece FULL window trim package with upper trim, pillar posts and window sills, while WP10178 is a four-piece package with upper trim only, no pillar posts and no sills. WS10177 is named by number only. Check each listing's own year range against your 4Runner, and its photos for finish.
Bezel and rear accent together
RD10177 and this bezel both work at the back of the 4Runner. The catalog doesn't describe how they sit relative to each other, so compare both listings' photos side by side if you want the pair.
Why a bezel
The plate is centered on the liftgate, so a polished frame around it is one of the first things people see from behind. It's a single piece with a contained install, which makes it an easy way to try polished stainless on your 4Runner.
Care
Mild soap, water and a soft towel. Avoid scouring pads. The Fitment and Specs tabs repeat the row and list the UPC.
LP10177 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP10177 |
| UPC | 691821593224 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2024 Toyota 4Runner |
Fitment: LP10177
| Vehicle | Years | Body style |
|---|---|---|
| Toyota 4Runner | 2010-2024 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2024 Toyota 4Runner
- DH10177: 8-piece Door Handle Cover Kit
- GC10178: 1-piece Gas Door Cover Trim
- PP10177: 4-piece Pillar Post Trim
- PP10178: 6-piece Pillar Post Trim
- RD10177: 1-piece Rear Deck Accent
- WP10177: 14-piece Window Trim Package
- WP10178: 4-piece Window Trim Package
- WS10177: 4-piece Window Sill Trim Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP10177 License Plate Bezel
Which 4Runner years does LP10177 fit?
2010 through 2024, 4-door SUV.
Are there trim exclusions?
None are listed.
Are dimensions listed?
No. See the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
