Product Description
Toyota Corolla 2003-2008 Stainless License Bar with Key Access and Logo Cut Out (LB24112)
LB24112 is cut to work around what is already on the trunk. Its catalog note reads Includes key access, Includes Logo Cut Out, and that is the defining detail of this part. Rather than a plain strip, it is shaped so the trunk's key access and the logo can stay visible and usable with the bar in place. It fits the Toyota Corolla 4-door sedan, model years 2003 through 2008.
The basics
One piece, cataloged as a License Bar, Above plate accent Trim. Made in the USA from 26-gauge 304 stainless steel, polished to a mirror finish. It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so no holes are drilled. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Aligning the cutouts
With a shaped bar, the cutouts do the positioning for you. During the dry fit, line the key access opening up with the lock and the logo cut out around the emblem. If both openings sit right, the bar is in the right place. If they don't line up on your car, stop and call Quality Automotive Trims at 877-752-3811 with LB24112 before peeling the liner. The product photos show the shape. No width is listed.
Older paint, extra care
A Corolla from this range has years of wax, polish residue and road film around the plate and lock. Tape bonds to clean, sound paint. Wash the area well, then wipe it with rubbing alcohol until the cloth comes away clean. Look closely for chips, peeling clear coat or old adhesive from a previous emblem or dealer badge. Tape should go on solid paint, so deal with any loose finish first. The Installation tab lists temperature guidance.
Why cutouts help
A plain bar has to be centered by eye, and on a trunk with a lock and an emblem nearby, a plain strip can crowd them. A bar with openings for both solves two problems at once: it keeps the key usable and the logo visible, and it gives you fixed reference points. Most of the guesswork in placement goes away.
Install steps
Dry-fit with the liner on, using the cutouts as your guide. Mark each end with painter's tape. Peel the liner, set the bar against the marks with the openings centered on the lock and emblem, and press firmly around every edge, especially around the cutouts. Remove the marks and press once more. Close the trunk gently for the first day.
Other parts for this Corolla
Twelve other parts are listed. GC24112 is a one-piece gas door cover trim noted With crease contour. LP24112 is a one-piece license plate bezel. PP24112, PP24113 and PP24114 are pillar post kits of four, six and eight pieces. RD24112 is a one-piece part cataloged as Rear Deck Accent at 2". TH24112 is an eight-piece rocker upper kit at 4.875" that spans from the bottom of the molding down. TH24113, WQ24112, WS24112, WP24112 and WP24113 are named by number only here. Check each listing's photos for its finish.
LB24112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LB24112 |
| UPC | 691821395958 |
| Part type | License Bar, Above plate accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes key access, Includes Logo Cut Out |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2008 Toyota Corolla |
Fitment: LB24112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2003-2008 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2008 Toyota Corolla
- GC24112: 1-piece Gas Door Cover Trim
- LP24112: 1-piece License Plate Bezel
- PP24112: 4-piece Pillar Post Trim
- PP24113: 6-piece Pillar Post Trim
- PP24114: 8-piece Pillar Post Trim
- RD24112: 1-piece Rear Deck Accent
- TH24112: 8-piece Rocker Panel Trim, Upper Kit
- TH24113: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Bar, Above plate accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LB24112 License Bar, Above plate accent Trim
Does LB24112 have a key opening?
Yes. The catalog notes Includes key access, Includes Logo Cut Out.
Which Corolla years does it fit?
2003 through 2008, 4-door sedan.
How do I line it up?
Dry-fit it so the key access and logo cut out sit around the lock and emblem. If they don't line up, call 877-752-3811 before peeling the liner.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
