Product Description
Toyota Corolla 2003-2008 Sedan Gas Door Trim with Crease Contour (GC24112)
GC24112 fits the Toyota Corolla 4-door sedan from 2003 through 2008, and it has one detail worth noting: the catalog notes it is made with a crease contour. It's one polished 304 stainless piece, 26 gauge, made in the USA, mounted with 3M automotive-grade acrylic foam tape.
The crease contour
The note "With crease contour" means the trim is shaped with a crease rather than being completely flat. The catalog doesn't describe the crease further, so check the product photos to see how it follows the door. When you dry-fit it, line the crease up with the shape of your fuel door before marking the position.
It's trim, not a cap
Confirm first: this Corolla piece is a cover, not a replacement cap or part; the sedan's gas door must be in place.
Fitment
Toyota Corolla, 2003-2008, 4-door sedan. Six model years, one row; see the Fitment tab.
Rear trim with useful notes
LB24112 is a license bar above the plate that includes key access and a logo cut out. RD24112 is a one-piece rear deck accent, 2 inches. LP24112 is a license plate bezel. The license bar's key access and logo cut out notes mean it was made around those features; its photos show how.
Sides and windows
- TH24112, a rocker panel upper kit for these sedans, is listed as eight pieces at 4.875 inches, spanning from the molding's bottom edge down.
- PP24112, PP24113, PP24114: pillar post sets in four, six and eight pieces.
TH24113, WQ24112, WS24112, WP24112 and WP24113 are also listed; their pages have the details. QAA doesn't spell out what the additional Corolla pillar pieces cover, so compare photos.
Mounting
The crease-contoured cover sits over the Toyota's existing fuel door, no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Surface check
Corollas from these years have had plenty of time in the sun. Look at the fuel door's paint for fading, chips or peeling clear coat and repair any problems first; the tape bonds to that paint. Make sure the door latches and sits flush.
Install
Wash the door face and rinse it. Wipe with degreaser and allow it to dry. With the door closed and the liner still on, set the trim in place, matching the crease to the door's shape and centering the border. Mark the spot with painter's tape on the body. Peel, align and press firmly all over, paying attention to both sides of the crease. Press again after a minute, then open the door slowly to check clearance. The Installation tab has more.
Why do the gas door first
Even with its crease, this is a single part with no second piece to match. That makes it the easiest stainless accent in the Corolla lineup above, and a good preview of how polished steel looks on your paint before you choose a rocker kit or pillar set.
Conditions and care
Mild, dry weather; dry overnight. Afterward, mild soap and a soft cloth, and wipe off fuel drips.
Questions
For the Corolla fuel door trim, call 877-752-3811 and give GC24112. The UPC is in Specs.
GC24112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | GC24112 |
| UPC | 691821636662 |
| Part type | Gas Door Cover Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With crease contour |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2008 Toyota Corolla |
| Not included | This is NOT a replacement gas cap or door; your existing gas door is required |
Fitment: GC24112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2003-2008 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2008 Toyota Corolla
- LB24112: 1-piece License Bar, Above plate accent Trim
- LP24112: 1-piece License Plate Bezel
- PP24112: 4-piece Pillar Post Trim
- PP24113: 6-piece Pillar Post Trim
- PP24114: 8-piece Pillar Post Trim
- RD24112: 1-piece Rear Deck Accent
- TH24112: 8-piece Rocker Panel Trim, Upper Kit
- TH24113: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Gas Door Cover Trim
- Confirm your vehicle still has its original gas door. This trim mounts over it and does not replace it.
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: GC24112 Gas Door Cover Trim
Is GC24112 a replacement gas cap?
No. It is not a replacement cap or part. You must have the existing gas door to install this piece.
Which Corolla does it fit?
The 2003-2008 Toyota Corolla 4-door sedan.
Is it flat?
The catalog notes it is made with a crease contour. See the photos for the shape.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. No drilling.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
