Product Description
Toyota Corolla 2003-2008 Stainless License Plate Bezel (LP24112)
LP24112 frames the plate area of the Toyota Corolla 4-door sedan from 2003 through 2008 with a single piece of mirror-polished stainless. The row lists six model years, sedan only, without trim exclusions. It is cut from 26-gauge 304 stainless steel and made in the USA.
Cutouts: the bar has them listed, the bezel doesn't
Here's the comparison that's most useful on this Corolla sheet. LB24112, a one-piece License Bar, Above plate accent Trim for the same sedan, has notes saying it Includes key access and Includes Logo Cut Out. LP24112's listing has no such notes. That doesn't prove the bezel has no openings; it means the catalog doesn't say either way. So before ordering, look closely at the bezel's product photos and compare them with the area around your plate, particularly any lock or emblem nearby. If you can't tell, call Quality Automotive Trims at 877-752-3811 with SKU LP24112. The bar is an accent above the plate and the bezel frames the plate area, so they can be used together; if you want both, view the two sets of photos side by side.
Mounting and prep
The bezel mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface. No drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. On a car from these years, check the paint around the plate before anything else, and repair chips or lifting clear coat, since the tape can only hold to a sound surface. Then remove the plate, wash, rinse and dry, and wipe with rubbing alcohol. Dry-fit with the liner on, check that it sits square from behind, mark it with painter's tape, then peel and press firmly around the whole frame, twice. Stay within the temperature range on the Installation tab.
Other Corolla listings
RD24112 is a one-piece Rear Deck Accent at 2", the other cataloged part for the back of the car. GC24112 is a one-piece gas door cover trim noted With crease contour. TH24112 is an eight-piece Rocker Panel Trim, Upper Kit at 4.875" that Spans from the bottom of the molding DOWN to the specified width. Pillar posts come as PP24112, PP24113 and PP24114 with four, six and eight pieces. TH24113, WQ24112, WS24112, WP24112 and WP24113 are cross-listed by number only. Check each listing for its finish.
Dimensions
None are given for the bezel, so the photos are the reference for its outline. Hold your phone's picture of the plate area next to them, and compare the corners and the top edge in particular, where the outline is easiest to judge against your own car.
Plate frame and year
If you run a frame around the plate, refit it during the dry fit to confirm it doesn't cover the bezel. Your records should show a Corolla sedan between 2003 and 2008.
For upkeep, rinse off grit first, then wash with mild soap and water and dry with a soft towel. Leave scouring pads out of it.
LP24112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP24112 |
| UPC | 691821426119 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2003-2008 Toyota Corolla |
Fitment: LP24112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2003-2008 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2003-2008 Toyota Corolla
- GC24112: 1-piece Gas Door Cover Trim
- LB24112: 1-piece License Bar, Above plate accent Trim
- PP24112: 4-piece Pillar Post Trim
- PP24113: 6-piece Pillar Post Trim
- PP24114: 8-piece Pillar Post Trim
- RD24112: 1-piece Rear Deck Accent
- TH24112: 8-piece Rocker Panel Trim, Upper Kit
- TH24113: 4-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP24112 License Plate Bezel
Which Corolla does LP24112 fit?
The 2003-2008 Toyota Corolla 4-door sedan.
Does the bezel have a key or logo cutout?
Its listing doesn't say. The key access and logo cut out notes are on LB24112, the license bar. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Can I use it with LB24112?
They're different parts, a bezel around the plate area and a bar above the plate. Compare their photos if you want both.
How many pieces?
One.
