Product Description
Toyota Corolla 2020-2026 Stainless License Plate Bezel (LP70112)
The Toyota Corolla 4-door sedan, model years 2020 through 2026, is the only vehicle on the LP70112 fitment row. Seven years, no exclusions, one piece. If your Corolla is a sedan from that span, this is the plate bezel the catalog lists for it.
Maybe you came here while looking at the Corolla's pillar trim. The catalog links six Pillar Post Trim kits for this sedan, and they climb in steps of two: PP70112 with four pieces, PP70113 with six, PP70114 with eight, PP70115 with ten, PP70116 with twelve and PP70117 with fourteen. PP70115 is the only kit with a note, "Includes rear triangle," so check the photos for what the others contain. A bezel is a very different job from a pillar kit. It's one piece, it frames the plate area, and it's done in a fraction of the time.
GC70112, a one-piece Gas Door Cover Trim, is also listed. Six more are linked by number only: LB70112, RD70112, TH70112, WP70112, WP70113 and WS70112. This sheet doesn't describe them, so check their own listings for type, finish and mounting. If any of them is meant for the back of the sedan, stage it with the bezel before installing either.
What is the bezel made of? 26-gauge 304 stainless steel, polished to a mirror finish, made in the USA. Stainless doesn't need a plated top layer for its shine, so there's no coating to chip. The record doesn't list dimensions, so use the product photos to judge its outline against your own Corolla.
How does it mount? The 2020-2026 Corolla bezel goes onto the existing surface with 3M automotive-grade acrylic foam tape, so nothing is drilled. QAA says the tape will hold for a lifetime without harming the Corolla's surface.
What has to happen first? Paint inspection. Tape sticks to the finish, so chips or flaking clear coat near the plate need fixing before the bezel goes on. Then the cleaning: remove old adhesive, wash with soap and water, dry fully, and wipe with rubbing alcohol.
How do I place it? Leave the liner on and hold the bezel in position. Step back from the car, shift it until it looks even, and mark the edges with short strips of painter's tape. Then peel, line up with the marks and press firmly around the perimeter. The Installation tab lists the steps and the temperature range the tape needs. A dry, mild day is the right weather.
Anything to check before ordering? Two checks: the Corolla's model year, and whether any plate frame clears the bezel in the dry fit; if either is in doubt, call 877-752-3811. After installation, mild soap, water and a soft cloth keep it bright. Questions go to Quality Automotive Trims at 877-752-3811; mention LP70112.
Is it a good first piece? For many owners, yes. A single part without hardware, it shows mirror-polished stainless on the Corolla and, once on, becomes the reference for spacing anything fitted to the back later.
LP70112 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP70112 |
| UPC | 840251605452 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2020-2026 Toyota Corolla |
Fitment: LP70112
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Corolla | 2020-2026 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2020-2026 Toyota Corolla
- PP70112: 4-piece Pillar Post Trim
- PP70113: 6-piece Pillar Post Trim
- PP70114: 8-piece Pillar Post Trim
- PP70115: 10-piece Pillar Post Trim
- PP70116: 12-piece Pillar Post Trim
- PP70117: 14-piece Pillar Post Trim
- GC70112: 1-piece Gas Door Cover Trim
- LB70112: 1-piece License Bar, Above plate accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP70112 License Plate Bezel
Which Corolla does LP70112 fit?
The 2020 through 2026 Toyota Corolla 4-door sedan.
How many Corolla pillar kits are listed?
Six, from PP70112 with four pieces to PP70117 with fourteen.
Which pillar kit includes the rear triangle?
PP70115, the ten-piece kit, per its note.
How is the bezel installed?
With 3M automotive-grade acrylic foam tape directly over the existing surface. No drilling.
What is it made of?
One piece of polished 26-gauge 304 stainless steel, made in the USA.
