Product Description
Toyota Camry 2012-2014 Roof Insert, 2-Piece, 0.5 x 54.5 Inch Stainless (RI12130)
RI12130 has a full measurement in its span note, which reads 0.5" width x 54.5" length. It's a two-piece polished stainless roof insert trim for the Toyota Camry 4-door sedan, model years 2012 through 2014.
Reading the dimensions
Half an inch wide and fifty-four and a half inches long describes a long, slender strip. The data doesn't say whether that length applies to each of the two pieces or is a combined figure. Don't assume either way; the photos and a call to 877-752-3811 are the way to be sure.
Measure your car
Run a tape measure along the roof where the photos show the insert. If your measurement is close to fifty-four and a half inches, that's a good sign you're looking at the right area.
Material and mounting
Each piece is 26-gauge 304 stainless steel, mirror-polished and made in the USA, with 3M automotive-grade acrylic foam tape. They install over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Long strips need careful prep
More length means more opportunity for a dirty spot to break the bond. Wash the roof, dry it, and wipe the full length of each footprint with a residue-free cleaner. Keep switching cloths until one comes back clean.
Applying a long piece
Dry-fit with the liner on and mark both ends with painter's tape. Peel only the first few inches of liner, anchor one end, then pull the liner gradually while pressing along the length. This keeps the strip straight. Fit the second Camry insert and compare. A helper is useful for holding the long pieces. The Installation tab has the full steps.
Camry parts in the same record
RD12130 is a rear deck accent at 1.25 inches. LB12130 and LP12130 are the license bar and plate bezel. MC12130 is a two-piece mirror cover set, top half only. SG12130 and SG12131 are front grille accents for the lower airdam, 1.875 inches wide and 1 inch narrow. TH12130 is a four-piece lower rocker kit, 1 inch, with trim crease. GC12130 covers the gas door, and PP12130 and PP12131 are pillar kits.
Four door handle kits are listed: DH12130 and DH12131, eight and four pieces; DH12132 and DH12133, eight and four pieces with smart key access. Choose by whether your Camry has smart key access at the handles. Check every listing for its finish.
Care
Wait a few days to wash, then mild soap and a soft cloth. Solid 304 has no plated surface to wear thin.
Safety on the roof
Work from a sturdy step stool or ladder rather than leaning across the roof, and keep one hand free. Rushing a long strip from an awkward angle is the easiest way to set it crooked.
What it is
Decorative roof trim, not a factory replacement part.
The 2012-2014 Camry roof insert set is RI12130 (UPC 691821379941); for fit help, ring 877-752-3811.
If anything about RI12130 is unclear before you order, call QAA at 877-752-3811 and ask.
RI12130 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RI12130 |
| UPC | 691821379941 |
| Part type | Roof Insert Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.5" |
| Coverage / notes | 0.5" Width X 54.5" Length |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2012-2014 Toyota Camry |
Fitment: RI12130
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Camry | 2012-2014 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2012-2014 Toyota Camry
- DH12130: 8-piece Door Handle Accent Trim
- DH12131: 4-piece Door Handle Accent Trim
- DH12132: 8-piece Door Handle Accent Trim
- DH12133: 4-piece Door Handle Accent Trim
- GC12130: 1-piece Gas Door Cover Trim
- LB12130: 1-piece License Bar, Above plate accent Trim
- LP12130: 1-piece License Plate Bezel
- MC12130: 2-piece Mirror Cover Set
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Roof Insert Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RI12130 Roof Insert Trim
Which Camry does RI12130 fit?
The Toyota Camry 4-door sedan, 2012 through 2014.
What are the dimensions?
The record lists 0.5" width x 54.5" length; it doesn't say whether that's per piece.
How many pieces?
Two.
Which door handle kits include smart key access?
DH12132 (eight pieces) and DH12133 (four pieces).
How does it mount?
3M tape over the existing surface.
