Product Description
Dodge Nitro 2007-2011 Stainless Wheel Well Accent Trim WQ47940, 6 Pieces
WQ47940 is a six-piece polished stainless steel Wheel Well Accent Trim for the 2007-2011 Dodge Nitro 4-door SUV. The listing says "With 3M adhesive installation and black rubber gasket edging". The record lists no width.
Fitment
Dodge Nitro SUV, 2007-2011, only. Compare your arches with the photos, and phone 877-752-3811 with any question.
Six pieces
Six polished stainless pieces, each with black rubber gasket edging. The record doesn't state how the six are split across the four openings, so match each to the photos before you start and pencil its position on the liner.
Material
The Nitro's six pieces are USA-made, polished 26 gauge 304 stainless steel, attached over the existing paint with 3M automotive-grade acrylic foam tape. QAA says that tape will hold for a lifetime and won't damage the Nitro.
Nitro group
Two rocker kits are linked: TH47940, a six-piece lower kit at 3.75" that spans from the bottom of the door up, and TH47941, a four-piece insert kit at 1", "Side Molding". The record doesn't say whether they can be combined, so check with 877-752-3811. Also listed: SG47940, a 3.5" lower front grille accent; RB47940, a rear bumper accent at 8.75"; a 1.25" rear deck accent; a license bar "With Logo Cut Out"; a license plate bezel; pillar sets PP47940 (4) and PP47941 (6); and a four-piece window sill set.
Before ordering
Confirm the year is 2007-2011. If a rocker kit is in your plans, decide which one and fit it first.
Preparing the Nitro
Use a step to reach the top of each arch comfortably. Wash the opening and its surround, rinse and dry it, and let the lip drain. Then go section by section along the band for tar, wax, adhesive residue and chips. Clear them. Wipe with wax-and-grease remover, and hold the isopropyl alcohol until each piece is ready.
Fitting
One opening at a time. Hold up the pieces the photos place there, liners on, and tape their outer ends so you can see the joins. Fix the first from its outer end toward the join; set the next from the join outward. Peel only a short length at a time, pressing straight behind it. Compare each finished opening with the last as you go around the SUV.
Arrival and care
Count six Nitro pieces at delivery. After fitting, the tape gets a day before any wash, and from then on mild soap and a soft cloth do the job; keep a pressure washer away from the gasket. Questions are welcome by phone.
On the day
Group the six pieces by opening on a towel using the photos, and mark each liner. Have a step, painter's tape, both cleaners and clean cloths ready. Fit any rocker kit first. If a piece can't be placed from the photos, phone 877-752-3811 with SKU WQ47940 and UPC 691821736454 before going further.
Check the model year on your paperwork before ordering, and keep every liner on until its piece has been held in place on the Nitro.
The six-piece Nitro kit is WQ47940 with UPC 691821736454; reach us at 877-752-3811.
WQ47940 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ47940 |
| UPC | 691821736454 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Edging | Black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2007-2011 Dodge Nitro |
Fitment: WQ47940
| Vehicle | Years | Body style |
|---|---|---|
| Dodge Nitro | 2007-2011 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2007-2011 Dodge Nitro
- LB47940: 1-piece License Plate Bar Accent
- LP47940: 1-piece License Plate Bezel
- PP47940: 4-piece Pillar Post Trim
- PP47941: 6-piece Pillar Post Trim
- RB47940: 1-piece Rear Bumper Trim Accent
- RD47940: 1-piece Rear Deck Accent
- TH47940: 6-piece Rocker Panel Trim, Lower Kit
- TH47941: 4-piece Rocker Panel Trim, Insert Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Seat the black rubber gasket edging evenly along the wheel opening as you press the trim on.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ47940 Wheel Well Accent Trim
Which vehicle does WQ47940 fit?
The 2007-2011 Dodge Nitro 4-door SUV.
How many pieces?
Six, with black rubber gasket edging.
Which rocker kits are linked?
TH47940 (lower kit, 3.75") & TH47941 (Side Molding insert, 1").
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
