Product Description
Ford Explorer 2006-2010 with Flares: Full Rocker Kit, 5", 8 Pieces (TH46331)
TH46331 is a Full Kit for the Ford Explorer four-door SUV, 2006-2010, tagged "w/ Flares." Eight polished stainless steel pieces, 5" wide, fill the band described in the note: "Spans from the bottom of the molding to the bottom of the door."
The flares tag
The record is specific to Explorers with flares. It doesn't link a no-flares version for these years, and it has no siblings at all. If your Explorer doesn't have flares, or they were fitted or removed after it left the dealer, call 877-752-3811 with photos before ordering.
Molding above, door edge below
A Full Kit is bounded top and bottom. The top edge of each piece meets the bottom of the side molding and the bottom edge follows the door's lower edge, so the gap between them is what has to match. Measure it on a front door and a rear door; it should be close to five inches. If one door is noticeably different, or a molding strip is missing, ask before buying. Molding isn't part of the kit.
Near the flares
The data doesn't say which pieces sit closest to the wheel openings or how they finish next to the flares. Dry-fit the whole side with painter's tape and check those ends before peeling anything.
Eight pieces
No layout is given. Lay them out on a towel, compare with the product photos, and mark each liner by door.
Steel and tape
- 26-gauge 304 stainless, polished to a high standard.
- The Explorer steel is made in America.
- Bonds to the 2006-2010 Explorer's surface with 3M automotive-grade acrylic foam tape.
Per QAA, the tape fixing the eight Explorer strips on SUVs with flares will hold for a lifetime without causing any damage to the Ford.
Prep
Wash the lower doors and the corner under the molding, rinse, dry, and wipe the band with isopropyl alcohol. Touch up chips on the door bottoms.
Fitting
Set each piece between molding and door edge with painter's tape, then peel a few inches of liner, align, and press along while the rest comes away. Firm pressure over the full face at the end.
Checks after
Open every door fully. Sight along the SUV from the front corner; the top edges should follow the molding. Leave it a day before washing.
Explorer molding line
Door gaps on the 2006-2010 Explorer give fixed points for spacing every piece evenly.
Care
Mild soap, soft mitt, towel dry. No abrasive pads.
Weather
Work on a mild, dry day or in a garage.
Before ordering
Four-door Explorer, 2006-2010, flares fitted, molding on every door, about five inches of door below it. If all of that matches, this record describes your truck.
A helper
A second person keeps each piece's far end off the paint.
What to send when you call
Year, a photo of a full side that shows the flares and the molding, and a tape measure reading from the bottom of the molding to the bottom of a front door. With those three things we can confirm the fit quickly.
Explorer flared kit TH46331 (UPC 691821669851): phone 877-752-3811, Quality Automotive Trims.
TH46331 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH46331 |
| UPC | 691821669851 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2010 Ford Explorer |
Fitment: TH46331
| Vehicle | Years | Body style |
|---|---|---|
| Ford Explorer | 2006-2010 | 4-door, SUV, w/ Flares |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH46331 Rocker Panel Trim, Full Kit
What does TH46331 fit?
The Ford Explorer four-door SUV with flares, 2006-2010.
My Explorer has no flares.
This record is tagged for flares. Call 877-752-3811.
Where does it go?
Between the bottom of the molding and the bottom of the door, 5" wide.
How many pieces?
Eight.
