Product Description
TH44330 Full Rocker Kit in Eight Pieces, 5", for the 2002-2010 Ford Explorer 4-Door SUV Without Flares
TH44330 is a Full Kit for the Ford Explorer four-door SUV, tagged "NO Flares," with a fitment span of 2002-2010. Eight polished stainless steel pieces, 5" wide, fill the band the note describes: "Spans from the bottom of the molding to the bottom of the door."
Between two edges
This Full Kit fills the area between the side molding above and the bottom of the door below. So two things on your Explorer set the fit: the molding has to be there, and the distance from its lower edge to the door bottom should be close to five inches. Measure a front and a rear door before ordering. If the numbers are off, or your molding is missing or damaged, call 877-752-3811 with photos.
Flares
The tag says no flares. A separate eight-piece Explorer kit tagged for flares has a shorter year span and isn't linked here. If your Explorer has flares, call us rather than ordering this one.
A long year range
The span runs from 2002 to 2010. The record doesn't break it down by year, so if anything about your truck's lower doors looks different from the product photos, ask before buying.
No linked parts
This record has no siblings, so there's no pillar, sill or wheel well trim paired with it here.
The steel
- Polished 304 stainless steel, 26 gauge, high quality.
- Built in America.
- Goes over the Explorer's existing surface on 3M automotive-grade acrylic foam tape.
According to QAA, the tape fixing the eight Explorer strips on SUVs without flares will hold for a lifetime with no damage to the 2002-2010 Ford.
Molding condition
Every piece's top edge meets the molding. Re-secure loose sections first. Molding isn't part of the kit.
Cleaning
Wash the lower doors and the corner under the molding, rinse, and dry. Wipe with isopropyl alcohol until the cloth stays clean. Touch up chips.
Eight pieces
QAA's website lists eight for TH44330, and the Specs tab matches. The data gives no layout; sort with the product photos and number the liners.
Fitting
Dry-fit each piece between the molding and the door bottom with painter's tape. Then peel a few inches of liner, align, and press along as the rest comes off. Finish with firm pressure.
After
Open all four doors to confirm clearance. Sight along the Explorer. Wait a day before washing.
Explorer seams
Use the door gaps to keep piece positions consistent.
Conditions
Do the Explorer job in dry, mild weather or a garage, pieces at room temperature.
Care
To clean, use mild soap and a soft mitt, then towel the Explorer dry.
Before ordering
Confirm four things: a four-door Explorer, no flares, a year in the listed span, and about five inches of door between the molding and the bottom edge. If all four check out, this record matches. If not, send a photo of the full side to 877-752-3811.
A helper
Someone holding the far end of each piece off the paint makes it easier to keep the edges tight to the molding and the door bottom.
Explorer kit TH44330 carries UPC 691821562770; call Quality Automotive Trims on 877-752-3811.
TH44330 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH44330 |
| UPC | 691821562770 |
| Part type | Rocker Panel Trim, Full Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 5" |
| Coverage / notes | Spans from the bottom of the molding to the bottom of the door |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2002-2010 Ford Explorer |
Fitment: TH44330
| Vehicle | Years | Body style |
|---|---|---|
| Ford Explorer | 2002-2010 | 4-door, SUV, NO Flares |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Rocker Panel Trim, Full Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH44330 Rocker Panel Trim, Full Kit
What does TH44330 fit?
The Ford Explorer four-door SUV without flares, 2002-2010.
Where does it go?
From the bottom of the molding to the bottom of the door, 5" wide.
My Explorer has flares.
This record is tagged NO Flares. Call 877-752-3811.
How many pieces?
Eight, per QAA's website.
