Product Description
Chrysler 300 2011-2023 Lower Kit, 8 Pieces, 1.25"-1.375" Tapered (TH51760)
TH51760 is an eight-piece polished stainless steel Lower Kit for the Chrysler 300 sedan, listed for 2011 through 2023. The trim spans from the bottom of each door up to a tapered 1.25"-1.375".
A long fitment run
Thirteen model years sit on one 4-door sedan row, with no trim exclusions. That makes this the 300 Lower Kit to look at whatever year your car is within that span.
A separate rocker kit, not linked
QAA also catalogs a four-piece rocker kit for the 300 that installs below the door, covers a shorter span of years and excludes the S model. It isn't linked to this record. If you want trim below the doors rather than on them, call 877-752-3811 and we'll point you to it.
A small taper
From 1.25" to 1.375" is an eighth of an inch. The record doesn't say which end is wider. A dry fit with painter's tape makes it obvious.
Linked 300 parts
PP51760 (four pieces) and PP51761 (six) are pillar post sets, and GC51760 is a gas door cover. Each is sold separately. Check each listing for its finish.
Built from
The eight Chrysler 300 strips taper from 1.25" to 1.375" and rise from the door bottom; they are USA-made polished 26 gauge 304 stainless steel set with 3M automotive-grade acrylic foam tape. QAA says the tape will hold for a lifetime without harming the sedan.
Preview
A strip of painter's tape about an inch and a quarter tall along the bottom of a door shows where the polished line will sit.
Eight pieces
No layout is given. Match each piece to the photos and label the liners.
Prep
Wash, dry, and wipe the lower doors with isopropyl alcohol.
Install
Hold each piece with painter's tape, open and close the door, then peel and press.
Contact
Before ordering
Make sure the car is a 300 sedan from 2011 through 2023. If your 300 has aftermarket body pieces or guards near the bottom of the doors, or the doors look different from the product photos, send a picture to 877-752-3811 before buying.
Bottom-edge check
The trim starts right at the lower edge of each door. Look there for chips or loose paint and fix them before cleaning.
Have on hand
Car soap and a bucket, two or three clean towels, isopropyl alcohol, a roll of painter's tape, a tape measure and a pencil.
Matching the sides
Note how far each piece sits from the door edge, then set its mate the same distance on the other door.
Day of the install
Pick a mild, dry day and work out of direct sun.
Afterward
No washing for a day. After that, mild soap keeps the polish bright.
A helper
Someone holding the far end of each piece keeps it level while you set the near end and draw out the liner. It makes the narrow band easier to keep straight.
Questions about the year span or the rocker kit? We're glad to help.
For the eight-piece 2011-2023 Chrysler 300 kit, TH51760 (UPC 691821569328), ring 877-752-3811.
TH51760 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | TH51760 |
| UPC | 691821569328 |
| Part type | Rocker Panel Trim, Lower Kit |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.25" to 1.375" tapered |
| Coverage / notes | Spans from the bottom of the door UP to the specified width |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2023 Chrysler 300 |
Fitment: TH51760
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler 300 | 2011-2023 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2023 Chrysler 300
- GC51760: 1-piece Gas Door Cover Trim
- PP51760: 4-piece Pillar Post Trim
- PP51761: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rocker Panel Trim, Lower Kit
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: TH51760 Rocker Panel Trim, Lower Kit
Which Chrysler 300 years does TH51760 fit?
2011 through 2023, the 4-door sedan.
Does it go below the doors?
No. It spans from the bottom of the door up.
How wide is it?
It tapers from 1.25" to 1.375".
How many pieces?
Eight.
