Product Description
Chrysler Pacifica 2004-2006: Four-Piece Front and Rear Stainless Bumper Cap Trim (BC44750)
If you still drive a 2004-2006 Chrysler Pacifica and want it to look cared for, the bumpers are a good place to start. BC44750 is a set of four polished stainless bumper cap trim accents that QAA lists for the 2004-2006 Pacifica, and the catalog note is short and useful: front and rear. One purchase puts matching bright steel on both bumpers.
Quick facts
- Vehicle: Chrysler Pacifica, 4-door SUV
- Years: 2004, 2005, 2006
- Pieces: four, covering the front and rear bumpers
- Material: polished 26-gauge 304 stainless steel, made in the USA
- Mounting: pre-applied 3M automotive-grade acrylic foam tape
Where the pieces go
QAA divides this bumper cap trim between the front and the rear of the Pacifica. The catalog does not state how many pieces go on each end or the shape of each one. That is a question the product photos answer better than words, and if you would like a second opinion, our team can talk you through it on the phone.
Why add bumper cap trim
Bumpers are large painted surfaces, and they are often the plainest part of a vehicle. A bumper cap accent is a thin piece of bright metal laid onto that surface as a highlight. Doing both ends at once keeps the look balanced, so the Pacifica does not end up with shine on the nose and nothing on the tail.
Metal you can see
QAA forms these pieces in the USA from 26-gauge 304 stainless steel and polishes them to a mirror finish. Because the pieces are solid stainless, the brightness is in the metal, not in a plating applied to plastic. Grade 304 is a mainstream stainless alloy for trim, and 26 gauge is the sheet thickness. All four pieces share the same finish, so the front and rear will match.
Install notes
Each piece already carries 3M automotive-grade acrylic foam tape, and the trim goes directly over the existing surface of the bumpers. You will not need to drill or to remove the bumper covers. QAA states the tape will hold for a lifetime without causing any damage to the paint. On a vehicle that has been on the road for years, the bumpers may hold old wax or road film, so clean them carefully and let them dry. Do one bumper, step back and check it from a few angles, then do the other. The Installation tab has the full procedure.
Companion trim
The catalog does not list other QAA trim for the Pacifica alongside this SKU, so the Fitment tab will show only this part. If you are hoping to dress up other areas of the vehicle, give us a call and we can look into what is available. In the meantime, this four-piece set handles both ends of the SUV on its own, so it makes a complete upgrade by itself.
Contact
Call Quality Automotive Trims at 877-752-3811 with your model year. Mention part number BC44750, and see the Specs tab for the UPC.
BC44750 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | BC44750 |
| UPC | 691821350957 |
| Part type | Bumper Cap Trim Accent |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Front and Rear |
| Mounting | 3M automotive-grade acrylic foam tape (pre-applied); installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2006 Chrysler Pacifica |
Fitment: BC44750
| Vehicle | Years | Body style |
|---|---|---|
| Chrysler Pacifica | 2004-2006 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Bumper Cap Trim Accent
- Unpack all 4 pieces and match each one to its position on the vehicle before removing any tape liner.
- Clean and dry the mounting surface so the 3M automotive-grade acrylic foam tape bonds to paint or trim, not dirt or wax.
- Peel the liner, align the piece, and press it firmly into place directly over the existing surface.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: BC44750 Bumper Cap Trim Accent
Does BC44750 cover both bumpers?
Yes. QAA lists this four-piece set as front and rear bumper cap trim.
What years of Pacifica does it fit?
2004, 2005, and 2006 Chrysler Pacifica 4-door SUV.
How many pieces go on each bumper?
The catalog does not break that down. The product photos show the layout, or call 877-752-3811.
Is it real stainless?
Yes. Polished 26-gauge 304 stainless steel, made in the USA.
How do I install it?
Clean the bumpers, then press the pieces on with the pre-applied 3M acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without damaging the paint.
