Product Description
Toyota Tundra 2014-2021 Stainless Fender Trim, 2" Wheel Well Molding – WZ14145
WZ14145 is a four-piece Wheel Well Fender Trim Molding for the Toyota Tundra pickup, model years 2014 through 2021, listed for both 2-door and 4-door trucks. Each piece is recorded at 2" wide.
Molded stainless, imported
This is a molded stainless steel part, and the record describes it as high quality stainless steel, imported. QAA says the pieces are cut to shape and polished to a mirror shine. It mounts mechanically rather than with adhesive tape.
How it mounts
The record lists clip-on or screw-in installation, with lock tabs and screws both included. You choose one method. The record doesn't give step-by-step instructions for either, so if you aren't sure which suits your Tundra, call 877-752-3811 before starting and quote SKU WZ14145.
The splash guard step
One note on this record matters for planning: you must remove the stock splash guard, install the trim, then put the splash guard back on afterwards. Allow time for that, and keep the splash guard fasteners together so it goes back exactly as it came off. If your truck has no splash guard, or one that looks different, ask QAA before ordering.
Checking fit before you buy
Confirm the year falls between 2014 and 2021. Then compare the photos with your own wheel openings, and measure the fender lip area where the trim is shown sitting: the record gives 2" for the trim width. The record doesn't say which piece goes on which opening, so use the photos for that as well.
No linked parts
The record lists no other Tundra parts with WZ14145. It stands alone.
Preparing the fenders
Park on level ground, in shade, with the wheels straight. Wash the area around each wheel opening with mild soapy water and a soft brush or cloth, wipe it with clean water and let it dry. Road film and old wax come off with wax-and-grease remover. Clean surfaces make it easier to see how each piece lines up.
Fitting
Take off the splash guard first, as the note says. Hold each piece against its opening to check the fit against the photos before you fasten anything. Then fit it with the lock tabs or the screws, working along the piece so it sits evenly. Put the splash guard back once that opening is done, and move on to the next.
On delivery
Count four pieces and check the lock tabs and screws are in the box. Keep the pieces flat and protected until fitting.
Care
Wash with mild soap and a soft cloth; polish the stainless with a non-abrasive cloth.
After fitting
Walk round the Tundra and look at each opening from a few steps back. Check that each piece sits evenly and that each splash guard is back in place and secure. If a piece won't sit evenly, call QAA rather than forcing it.
Lay the four pieces out beside the truck in the order the photos show before removing the first splash guard.
Tundra WZ14145 · UPC 691821724758 · 877-752-3811.
WZ14145 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WZ14145 |
| UPC | 691821724758 |
| Part type | Wheel Well Fender Trim Molding |
| Pieces in kit | 4 |
| Material | Molded Stainless Steel |
| Finish | Polished to a mirror shine |
| Width | 2" |
| Coverage / notes | Must remove stock splash guard, install, then put back on after installation |
| Mounting | Clips or screws provided; hardware included |
| Origin | Imported |
| Fits | 2014-2021 Toyota Tundra |
Fitment: WZ14145
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Tundra | 2014-2021 | 2-door, 4-door, Pickup Truck |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Wheel Well Fender Trim Molding
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Mount with the clips or screws provided (hardware is included).
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WZ14145 Wheel Well Fender Trim Molding
Which Tundra does WZ14145 fit?
The 2014-2021 Toyota Tundra pickup, 2-door & 4-door.
How does it mount?
Clip on or screw in; lock tabs & screws are included.
Do I need to remove the splash guard?
Yes. The record says to remove the stock splash guard, install, then put it back.
What width is it?
2".
