Product Description
Toyota RAV4 2006-2015 Stainless Bull Bar Guard Trim, 1 Piece (FB13180)
Read this before anything else: FB13180 is guard trim that, per the catalog, works with the "Bull Bar" brush guard only. It's a single polished stainless piece listed for the Toyota RAV4 4-door SUV from 2006 through 2015, made in the USA from 304 stainless steel at 26 gauge.
Only with the Bull Bar brush guard
The catalog note reads: Guard Trim - works with the "Bull Bar" Brush Guard only. That means this piece is meant for a RAV4 that has that brush guard fitted. If your RAV4 doesn't have it, this listing isn't for your vehicle. The catalog doesn't describe the guard further, so if you're not sure whether yours is the right one, take a photo of the front of your SUV and call us before ordering.
Fitment
One row: Toyota Rav4, 2006-2015, 4-door SUV. That's a ten-year span, but the brush guard requirement above applies across it. The Fitment tab shows the row.
What it is
The listing files it as a front bumper accent. No dimensions are listed, and the catalog doesn't describe the exact location on the guard. The product photos show the shape; match them against your guard.
Material
Type 304 stainless steel, 26 gauge, polished. The bright surface is the metal itself rather than a coating.
Mounting
It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. Nothing to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Prep on a guard
A front guard catches bugs, road grime and stone dust. Wash the mounting area thoroughly, rinse, and degrease until a clean cloth comes away clean. Check the guard's surface where the trim will sit: the tape needs a sound surface without flaking or peeling. Let it dry completely.
Fitting
With the liner still on, hold the piece on the guard and stand in front of the SUV. Check that it's centered and level, and mark its ends with painter's tape. Peel the liner, align to the marks, and press firmly along its whole length. Press again a minute later. The Installation tab covers full prep steps.
Why add it
If your RAV4 already has the Bull Bar brush guard, this trim gives it a polished accent and changes nothing about how the guard is mounted.
Ordering checklist
- RAV4 from 2006-2015.
- Bull Bar brush guard installed.
- Photos match your guard.
If any of those is uncertain, call first.
Take a photo first
Because fit depends on the guard, a clear photo of the front of your RAV4 is the fastest way to settle any doubt. Compare it with the product photos, and if the guard looks different, call before you buy.
Conditions
Install on a mild, dry day; keep the SUV dry overnight.
Care
Mild soap and a soft cloth. Avoid abrasive pads.
Questions
For a Rav4 question about FB13180, phone 877-752-3811. Its barcode is listed in the Specs details.
FB13180 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB13180 |
| UPC | 691821598571 |
| Part type | Front Bumper Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Guard Trim - works with the "Bull Bar" Brush Guard only |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2006-2015 Toyota Rav4 |
Fitment: FB13180
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Rav4 | 2006-2015 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Bumper Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB13180 Front Bumper Trim
What does FB13180 fit?
The 2006-2015 Toyota RAV4 4-door SUV with the "Bull Bar" brush guard.
Will it fit without the brush guard?
No. The catalog says it works with the "Bull Bar" brush guard only.
How many pieces?
One guard trim piece.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
