Product Description
Toyota RAV4 2013-2015 Rear Deck Accent, 1.875 Inches Wide, Stainless (RD13180)
RD13180 is a one-piece rear liftgate accent for the Toyota RAV4 4-door SUV, model years 2013, 2014, and 2015. QAA lists it at 1.875 inches wide. It is cut from 304 stainless steel with a mirror polish, made in the USA, and installed with 3M tape over the existing surface.
A short three-year window
Only 2013 to 2015 are on this record. If your RAV4 is a different year, this listing does not include it, so check your registration before ordering.
Nearly two inches of polish
At 1.875 inches, the accent is a bold strip on the liftgate. QAA calls it a rear deck accent, which on the RAV4 means the rear gate. The catalog lists no length; the photos show how far across it runs.
A tight lineup
Three other QAA pieces are linked:
- LB13180, a license bar above the plate
- LP13180, a license plate bezel
- SG13180, a four-piece front grille accent insert package
The license bar and bezel complete the rear. The grille package gives you a way to carry trim to the front; check its listing for the finish.
Front and back in one order
With just these four pieces in total, it is practical to do the whole vehicle in one afternoon. Fit the grille package at the front, then work on the rear: deck accent, license bar, bezel.
Material
26-gauge 304 stainless steel, polished to a mirror. There is no plating, so the finish cannot peel or blister.
Mounting
The 1.875" RAV4 accent mounts over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, the tape will hold for a lifetime without harming the Toyota.
Clean the full footprint
A strip close to two inches wide puts a lot of tape on the liftgate, so every bit of the area needs to be clean. Wash and dry, then wipe with a residue-free cleaner. On an SUV of this age, look closely for chips and fading where the accent will sit, and fix them first.
Install
Dry-fit with the liner on and compare to the photos. Measure from each end to the liftgate edges and mark with masking tape. On a dry, mild day, peel the liner and press from the center outward across the whole width so the edges seat firmly. Wait a few days before washing. The Installation tab has the full steps.
Care
Mild soap and a soft cloth. A wide mirror surface shows swirl marks, so avoid abrasive pads and gritty compounds.
Why stainless
Check each linked RAV4 listing for its finish if you want front and rear alike. There is no plated coat to fade or peel with washing.
Before ordering
Confirm your year is 2013, 2014, or 2015 and that you have the 4-door SUV. Look at the license bar photos too, since it sits close to this accent and the two should line up.
Part details
SKU RD13180, UPC 691821518067. Call Quality Automotive Trims at 877-752-3811 with any fitment question.
RD13180 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD13180 |
| UPC | 691821518067 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.875" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Toyota Rav4 |
Fitment: RD13180
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Rav4 | 2013-2015 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Toyota Rav4
- LB13180: 1-piece License Plate Bar Accent
- LP13180: 1-piece License Plate Bezel
- SG13180: 4-piece Front Grille Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD13180 Rear Deck Accent
Which RAV4 does RD13180 fit?
The Toyota RAV4 4-door SUV, 2013 through 2015.
How wide is it?
1.875 inches.
How many pieces?
One.
What pairs with it?
LB13180 license bar, LP13180 license plate bezel, and the SG13180 grille insert package.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface.
