Product Description
Scion xB 2004 Stainless Front Bumper Accent, 2 Pieces, 2004 Model Only (FB24180-1)
FB24180-1 is a two-piece polished stainless accent for the front of the Scion xB 4-door hatchback, and the catalog is firm on the year: 2004 model only. The xB pieces are 304 stainless steel at 26 gauge, made in the USA. The xB accents are fixed with 3M automotive-grade acrylic foam tape.
2004 only
The note "2004 Model only" appears alongside a fitment row that reads Scion xB, 2004-2004, 4-door Hatchback. If your xB is from any other year, this listing doesn't cover it. Make sure your xB's year matches. The Fitment tab shows the row.
Where it goes: the catalog's wording
The listing is filed as a front bumper accent, but its second note reads "Fender, under light pro." That text appears to be cut off, and we've flagged it for review. What it does suggest is a location near the fender, below a light. Rather than guess at the rest, please look closely at the product photos, which show the two pieces and their placement. If your xB's front end doesn't look like what you see there, call before ordering.
Two pieces
The catalog lists two pieces but doesn't say how they are placed; the photos show the layout. The photos are the guide. No dimensions are listed.
The steel
Polished 304 stainless at 26 gauge. Its shine comes from the steel's own polished surface, not a plating.
Mounting
On the 2004 xB, both bumper pieces fit over the existing surface without drilling. Per QAA, the tape will hold for a lifetime and won't harm the Scion's surface.
Prep on an older car
The front corners of a car pick up bugs, road film and small chips. Wash the areas where the pieces will go, rinse, and degrease until a clean cloth stays clean. On older paint, look for chips, peeling or chalky oxidation, because the tape bonds to the paint and needs it to be solid. Dry completely.
Placing a pair
Dry-fit both pieces with the liners on before peeling either. Compare them from directly in front of the car so they sit at the same height. Mark their edges with painter's tape. Peel the first liner, align, and press firmly over the whole piece, then press again after a minute. Fit the second piece the way you did the first. The Installation tab has full prep steps.
Why add it
Small polished accents at the front corners brighten the xB's face without changing the parts underneath.
Before ordering
- Your xB is a 2004 model.
- The photos match the front of your car.
- The paint where the pieces go is sound.
Single-year parts
Because this listing is limited to one model year, the photos and a quick call are worth more than usual.
Conditions
Install on a mild, dry day out of direct sun and keep the car dry overnight.
Care
Use mild soap and a soft cloth to keep it clean.
Questions
xB owners can ring Quality Automotive Trims at 877-752-3811 about FB24180-1; the UPC is listed on Specs.
FB24180-1 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB24180-1 |
| UPC | 691821485659 |
| Part type | Front Bumper Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | 2004 Model only; Fender, under light pro |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004 Scion xB |
Fitment: FB24180-1
| Vehicle | Years | Body style |
|---|---|---|
| Scion xB | 2004 | 4-door, Hatchback |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: Front Bumper Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB24180-1 Front Bumper Trim
What does FB24180-1 fit?
The 2004 Scion xB 4-door hatchback only.
Where do the pieces go?
The catalog note reads "Fender, under light pro," which appears cut off. Check the photos or call 877-752-3811.
How many pieces?
Two.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
