Product Description
GMC Yukon 2015-2020 Stainless Front Bumper Accent, 2 Pieces (FB55297)
FB55297 is a two-piece polished stainless front bumper accent for the GMC Yukon 4-door SUV, 2015 through 2020. It's made in the USA from 304 stainless steel at 26 gauge, and both pieces mount with 3M automotive-grade acrylic foam tape.
Yukon fitment
One row: GMC Yukon, 2015-2020, 4-door SUV. Six model years. The Fitment tab shows the entry as listed.
How the two pieces are laid out
The catalog doesn't describe how the two pieces sit on the bumper and lists no dimensions. The product photos show the arrangement, and they're the best way to see whether the shapes match your Yukon's front end. If they leave a question, call before ordering.
Related Yukon listings
Two other listings are cross-referenced:
- LBP55295, a two-piece upper hatch cover, listed as license plate bar trim with a logo cut out.
- TH55297, a four-piece upper rocker panel kit that spans from the bottom of the molding down to a width of 6.375. Its fitment note reads "XL only," so it's for the Yukon XL rather than every Yukon.
If your Yukon is standard length, keep that XL note in mind before choosing the rocker kit. The hatch cover carries no such restriction on this sheet.
The steel
Type 304 stainless at 26 gauge, polished. Thin sheet; bright because the metal is polished rather than plated.
Mounting
Both pieces install directly over the existing surface, so the bumper isn't drilled. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Cleaning the bumper
The front of an SUV collects bugs and road film fast. Wash the bumper, rinse, and degrease the mounting areas, repeating until a clean cloth stays clean. Remove any spray wax or sealant. Inspect for chips where the pieces will sit. Let everything dry.
Install
- Dry-fit both pieces with liners on, using the photos for placement.
- Stand in front of the SUV and check they're even.
- Mark the edges with painter's tape.
- Peel one liner, align, press firmly over the whole piece.
- Press again after a minute, then repeat for the second piece.
The Installation tab has the full prep.
Why the bumper
The front end is the face of the vehicle. Polished accents there brighten it up and leave the bumper itself unchanged.
Ordering checklist
Confirm a 2015-2020 Yukon, compare the photos with your bumper, and check the surface condition. Ordering the rocker kit? Confirm whether yours is an XL.
Getting both pieces even
With two pieces on the front, they're always seen together. Measure from a fixed point, such as the grille edge or a headlight, to each piece and keep the two measurements equal. A helper standing in front of the SUV makes this quicker.
Conditions
Mild, dry day, out of direct sun. Keep the SUV dry overnight.
Care
Mild soap and a soft cloth.
Questions
Call Quality Automotive Trims at 877-752-3811 and mention FB55297. The UPC is on the Specs tab.
FB55297 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | FB55297 |
| UPC | 691821356294 |
| Part type | Front Bumper Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2015-2020 GMC Yukon |
Fitment: FB55297
| Vehicle | Years | Body style |
|---|---|---|
| GMC Yukon | 2015-2020 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2015-2020 GMC Yukon
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Bumper Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: FB55297 Front Bumper Trim
What does FB55297 fit?
The 2015-2020 GMC Yukon 4-door SUV.
How many pieces?
Two front bumper accent pieces.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
Is there a matching rocker kit?
TH55297 is cross-listed, but its note says XL only.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
