Product Description
Ford Escape 2013-2016 Grille Overlay, Center Pieces, 2-Piece Stainless (SG53361)
SG53361 is the smallest of QAA's three grille overlay listings for the 2013-2016 Ford Escape: two polished stainless pieces noted "Overlay Package, Center pieces with Adhesive Promoter." If you only want the middle of the grille brightened, this is the set the record describes.
Where it sits among the three
SG53360 is the eight-piece full set; SG53362 is six vent cover pieces; this listing is the two center pieces. The record doesn't confirm whether the full set is simply these two plus the vent covers, though the counts line up. Before ordering more than one, compare the photos or ring Quality Automotive Trims at 877-752-3811.
Fitment
Ford Escape, 4-door SUV, model years 2013 through 2016. No exclusions.
Steel and adhesive
On the Escape, both pieces are 26-gauge 304 stainless with a mirror polish, made in the USA, attached with 3M automotive-grade acrylic foam tape to the existing surface. QAA states the tape lasts a lifetime without damaging the Ford. The data lists no dimensions.
Promoter is part of the package
The note says "with Adhesive Promoter." It's a primer that helps tape bond to plastic and painted surfaces. Use it only on the cleaned landing areas, and call us if you're unsure how to apply it.
Rear trim for the same Escape
LB53360, a two-piece license bar extension trim at 1-0.625, and LP53360, a license plate bezel, are linked. Read each listing for its finish.
Centering two pieces
Center pieces are judged against the middle of the vehicle, so measure from a fixed point on each side of the grille. Tape both up with liners on, look from straight ahead and from a few steps back, and adjust until they sit as the photos show.
Cleaning and priming
Wash and dry the front. Wipe each landing spot with a solvent that leaves no film until a clean cloth shows nothing. Let it dry, then apply the promoter exactly where the tape will go.
Setting the pieces
Peel one liner, align to your marks, and press firmly along the full piece; repeat. Go over the edges once more. A mild, dry day out of direct sun helps. See the Installation tab.
Fitting the vent covers later
If you buy the center pieces now and decide on the vent covers later, keep track of which listing is which so you don't double up with the full set.
Care
Wait a few days before washing; mild soap and a soft cloth after that. Polished 304 can be buffed back with a light polish.
Before ordering
Check for a replacement or repaired grille, which can differ from the shape the overlay follows. If your Escape's grille is original and sound, you're ready.
Why stainless
No plating layer to peel; the shine is in the steel itself.
When you call, mention whether you already own the vent covers or the full set, so we can tell you what else still makes sense for your Escape.
Two Escape grille pieces under SG53361 (UPC 691821586714); Quality Automotive Trims is at 877-752-3811.
SG53361 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | SG53361 |
| UPC | 691821586714 |
| Part type | Front Grille Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Overlay Package, Center pieces with Adhesive Promoter |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2016 Ford Escape |
Fitment: SG53361
| Vehicle | Years | Body style |
|---|---|---|
| Ford Escape | 2013-2016 | 4-door, SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2016 Ford Escape
- LB53360: 2-piece License Bar Extension Trim
- LP53360: 1-piece License Plate Bezel
- SG53360: 8-piece Front Grille Accent Trim
- SG53362: 6-piece Front Grille Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Front Grille Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: SG53361 Front Grille Accent Trim
What does SG53361 cover?
The record calls it the overlay package center pieces, two pieces.
Is it included in SG53360?
The data doesn't say. Call 877-752-3811 before ordering both.
Is adhesive promoter included?
The note says "Center pieces with Adhesive Promoter."
Which Escape years?
2013 through 2016, 4-door SUV.
Is the grille pulled for this install?
No; 3M tape over the existing surface.
