Product Description
Mazda CX-9 Stainless Hood Accent Trim, 1 Piece (HT17725)
HT17725 is a one-piece stainless hood accent trim for the Mazda CX-9 4-door SUV, but please read the fitment note before ordering. The product title says it fits the 2016-2023 CX-9. QAA's fitment row writes that span as "Mazda CX-9 2016-23," and the Fitment tab shows it in full as 2016-2023. If your model year sits outside that range, call us at 877-752-3811 and we'll confirm whether this hood accent fits your CX-9.
The CX-9 part is polished 304 stainless steel at 26 gauge, made in the USA. Mounting the CX-9 accent uses 3M automotive-grade acrylic foam tape. It installs directly over the existing surface, so there's no drilling, and QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
The catalog doesn't give a width or describe exactly where on the hood the accent sits, so the product photos are the reference. Once your fit is confirmed, hold the trim against the hood with its liner on to check that the shape matches before you start cleaning.
Surface first: look at the hood paint where the accent will go, and repair chips, peeling or hazy clear coat and blisters. Wash the area, rinse, dry fully and wipe with a degreaser. Dry-fit the accent, check its alignment from the front of the CX-9 and through the windshield from inside, and mark its ends with painter's tape. Then peel the liner, set one end on its mark, lower the rest into place and press firmly along its length. Press it again after a minute. The Installation tab has more detail.
Several CX-9 parts are cross-listed, and two of them come with widths stated in their notes. PP17725, PP17726 and PP17727 are pillar post sets with four, six and eight pieces; the eight-piece set includes the front triangle piece. LP17725 is a one-piece license plate bezel. RD17725, a one-piece rear deck accent, is listed at 5/8" wide. TH17725, a six-piece rocker panel trim labeled an insert kit, is noted as a side molding that tapers from 2 1/8" to 2 5/8". Each page covers its own placement, and 877-752-3811 can answer anything they leave open. Check each listing for its finish.
Polished 304 stainless gives the hood a bright accent, and the 26 gauge sheet keeps it slim. Install on a dry, mild day and let the tape set overnight before washing. Afterward, mild soap and a soft cloth keep it clean; skip abrasive pads.
When you call, have your model year ready; your records show the year. That way we can check the listing against your vehicle and give you a clear answer before anything ships. With a single hood piece and an eight-year span, a quick call settles any year question before you order. Reach Quality Automotive Trims at 877-752-3811 and mention HT17725. The UPC is on the Specs tab. Anything this page doesn't answer about the CX-9 can go to 877-752-3811.
HT17725 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT17725 |
| UPC | 840251603335 |
| Part type | Hood Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2023 Mazda CX-9 |
Fitment: HT17725
| Vehicle | Years | Body style |
|---|---|---|
| Mazda CX-9 | 2016-2023 | 4-door,SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2023 Mazda CX-9
- PP17725: 4-piece Pillar Post Trim
- PP17726: 6-piece Pillar Post Trim
- PP17727: 8-piece Pillar Post Trim
- RD17725: 1-piece Rear Deck Accent
- TH17725: 6-piece Rocker Panel Trim
- LP17725: 1-piece License Plate Bezel
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hood Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT17725 Hood Accent Trim
Which CX-9 years does HT17725 fit?
The 2016-2023 CX-9, shown in the fitment row as 2016-23. Call 877-752-3811 if your year is outside that.
How many pieces are included?
One hood accent trim.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Where on the hood does it go?
The catalog doesn't describe the exact position. Use the product photos, or call us.
