Product Description
Mazda CX-9 Stainless Steel License Plate Bezel, 1 Piece (LP17725)
LP17725 is a single polished stainless License Plate Bezel for the Mazda CX-9 4-door SUV. The years are worth a look first. The product title reads Mazda CX-9 2016-2023, and the fitment row gives the same range in short form as "Mazda CX-9 2016-23," which the Fitment tab writes out as 2016-2023. So any CX-9 from those eight model years is listed. If yours is outside them, or you're not sure of the year, please call Quality Automotive Trims at 877-752-3811 with the SKU LP17725 so someone can confirm the fit before you order.
What the part is
A one-piece frame for the plate area, made in the USA from 26-gauge 304 stainless steel with a mirror polish. The catalog doesn't give dimensions or mention any cutouts, so use the product photos to see the outline, and hold them up against the area around your own plate, including any lock, emblem, camera or lighting nearby.
How it attaches
The bezel uses 3M automotive-grade acrylic foam tape and installs directly over the existing surface, which means no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Once your fit is confirmed, remove the plate, wash and rinse the area, dry it fully and wipe it with rubbing alcohol. Repair any chipped or lifting paint first. Dry-fit with the liner on, stand back to check it's level and centered, and mark the position with painter's tape. Then peel, press firmly all the way around, and press again. The Installation tab gives the temperature range for the tape.
CX-9 parts on the same sheet
PP17725, PP17726 and PP17727 are pillar post kits with four, six and eight pieces, and the eight-piece kit Includes Front Triangle piece. HT17725 is a one-piece hood accent trim. Two of the linked listings also give widths in their notes, which helps if you are planning a fuller set. RD17725, a one-piece Rear Deck Accent, is listed at 5/8" wide. TH17725, a six-piece rocker panel trim also labeled an insert kit, is noted as a side molding tapering from 2 1/8" to 2 5/8". Their own pages explain where each piece sits on the CX-9, and the phone line can confirm sizes before you order. Check each listing for its finish.
A sensible first piece
Once the year question is settled, the bezel is the simplest part on this list to fit: one piece, one location, and no measuring beyond centering it. Seeing polished stainless on the back of your CX-9 also helps you judge whether the pillar kits are worth it.
When you call
Keep the CX-9's model year handy. If you also run a frame on your plate, mention it, and plan to refit it during the dry fit to make sure it doesn't overlap the bezel.
Keeping it bright
Mild soap, water and a soft towel are all polished stainless needs. Keep scouring pads and gritty compounds off the face.
LP17725 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP17725 |
| UPC | 840251603342 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2023 Mazda CX-9 |
Fitment: LP17725
| Vehicle | Years | Body style |
|---|---|---|
| Mazda CX-9 | 2016-2023 | 4-door,SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2023 Mazda CX-9
- PP17725: 4-piece Pillar Post Trim
- PP17726: 6-piece Pillar Post Trim
- PP17727: 8-piece Pillar Post Trim
- RD17725: 1-piece Rear Deck Accent
- TH17725: 6-piece Rocker Panel Trim
- HT17725: 1-piece Hood Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP17725 License Plate Bezel
Which CX-9 years does LP17725 fit?
2016 through 2023; the row's "2016-23" is shorthand for that span. Call 877-752-3811 with any question.
How many pieces?
One bezel.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Are dimensions listed?
No. See the photos.
What's it made from?
26-gauge 304 stainless steel, mirror polished, made in the USA.
