Product Description
2016-2020 Kia Sorento Polished Stainless License Plate Bezel (LP16820)
LP16820 puts a polished stainless frame around the plate area of the 2016-2020 Kia Sorento 4-door SUV. The listing is short, so this page sticks to what it actually says and is clear about what it leaves out.
Here is what the catalog tells us. The bezel is one piece. It is made in the USA from 26-gauge 304 stainless steel, the chromium-nickel grade commonly used for exterior trim, and the face is mirror polished. It is backed by 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there is no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. The fitment row covers five model years of the Sorento 4-door SUV, with no trim exclusions noted.
And here is what it doesn't. There are no dimensions, no width figure, and no notes about openings for a camera, lock, handle or lights. That doesn't mean the part lacks them; it means the photos are where you'll find the shape. Compare the outline in the product photos with the plate area of your Sorento before ordering. If you can't tell whether it will clear everything around the plate, take a photo of your vehicle's rear, then call Quality Automotive Trims at 877-752-3811 with SKU LP16820 and describe what you see.
The license bar on the same sheet
LB16820 is listed for this Sorento too. It's a one-piece License Plate Bar Accent, which is a different part from this bezel: the bar is an accent above the plate, while LP16820 frames the plate area. Neither listing gives measurements, so if you want both, view their photos together to judge how they will look as a pair.
Also cataloged for the Sorento
PP16820 and PP16821 are pillar post kits with four and six pieces. GC16820 is a one-piece gas door cover trim. RD16820 is a one-piece part cataloged as a Rear Deck Accent. Check each listing for its finish.
Getting it on
Remove the plate, then wash the area with soap and water and dry it completely. A rubbing alcohol wipe clears wax and film that soap misses, so don't skip it. While the area dries, look for paint chips or leftover adhesive from an old frame or dealer sticker, and deal with them, because tape can't bond to a loose surface. Hold the bezel in place with the liner on, step well back and look at it square from behind, then mark its position with painter's tape. Peel, place and press firmly around the frame, and press once more after a minute. The temperature range is on the Installation tab. Leave the plate screws snug but not overtightened when you refit it, so the plate doesn't press against the new frame.
Before you peel the liner, put any plate frame back on to confirm it doesn't overlap the bezel. After that, mild soap, water and a soft towel are all the polished stainless needs.
LP16820 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP16820 |
| UPC | 691821373857 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2020 Kia Sorento |
Fitment: LP16820
| Vehicle | Years | Body style |
|---|---|---|
| Kia Sorento | 2016-2020 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2020 Kia Sorento
- PP16820: 4-piece Pillar Post Trim
- PP16821: 6-piece Pillar Post Trim
- RD16820: 1-piece Rear Deck Accent
- GC16820: 1-piece Gas Door Cover Trim
- LB16820: 1-piece License Plate Bar Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP16820 License Plate Bezel
Which Sorento does LP16820 fit?
The 2016-2020 Kia Sorento 4-door SUV.
Is it the same as LB16820?
No. LB16820 is a License Bar above the plate; LP16820 frames the plate area.
Does it have a camera opening?
The catalog doesn't mention one. Check the photos or call 877-752-3811.
How does it attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One bezel.
