Product Description
Cadillac SRX 2010-2016 Stainless License Plate Bezel (LP50260)
LP50260 is the polished stainless License Plate Bezel for the Cadillac SRX 4-door SUV, model years 2010 through 2016. It comes as a single piece of 26-gauge 304 stainless steel with a mirror finish, made in the USA, and it frames the plate area. The bezel's catalog row is clean: seven model years, one body style, no notes. The same can't be said for every part listed beside it, so a few of those are worth a closer look before you plan a set.
A rocker kit with a garbled width
TH50260, an eight-piece Rocker Panel Trim, Lower Kit, is noted as spanning from the bottom of the door up to the specified width. Its width note, though, reads "3.5" - 3 0.75" tapered Width", and the structured width field shows 0.75". Those two don't line up cleanly, and we've flagged it. If you're ordering that kit, go by its photos and call Quality Automotive Trims at 877-752-3811 to confirm. None of this touches the bezel.
Rear deck and pillar parts
RD50260 is a one-piece part noted 1.125" Width X 51.5" Length. QAA names it a Rear Deck Accent for the SRX, an SUV; check its photos for where it goes. Three pillar post kits are listed: PP50260 with four pieces, PP50261 with six, and PP50262 with eight, the last noted Includes Front Triangle piece. MI50260 is an eight-piece Body Molding Insert Trim Kit at 1", and GC50260 a one-piece Gas Door Cover Trim. WQ50260 and MC50260 are cross-listed by number only. For finish and mounting, see each part's own listing.
Mounting the bezel
The bezel is held by 3M automotive-grade acrylic foam tape and goes directly over the existing surface, with nothing to drill. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Start with the paint. Anything chipped or lifting around the plate should be repaired first, and old adhesive peeled or rubbed off. Wash, dry and wipe with rubbing alcohol. Hold the bezel up with the liner still on, judge it from behind the SUV, and tape off its position before peeling and pressing it firmly into place. Steps and the temperature range are on the Installation tab.
One small job first
With ten parts on this page counting the bezel, it's easy to try to plan everything at once. The bezel is a sensible place to start instead. It's a single piece, it doesn't need to line up with any other part. Once it's on, you'll know how the polish looks against your SRX's paint and can weigh the rest one listing at a time.
Checking your SRX
SRX owners need a 2010 to 2016 model for this part. Compare the product photos with the area around your own plate, and call with SKU LP50260 if anything there looks different.
Finish and care
Because grade 304 stainless needs no plating, the mirror polish is part of the metal. A plate frame should be checked during the dry fit so it clears the bezel. Clean with mild soap and water and a soft cloth.
LP50260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP50260 |
| UPC | 691821559756 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2016 Cadillac SRX |
Fitment: LP50260
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac SRX | 2010-2016 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2016 Cadillac SRX
- GC50260: 1-piece Gas Door Cover Trim
- MI50260: 8-piece Molding Insert
- PP50260: 4-piece Pillar Post Trim
- PP50261: 6-piece Pillar Post Trim
- PP50262: 8-piece Pillar Post Trim
- RD50260: 1-piece Rear Deck Accent
- TH50260: 8-piece Rocker Panel Trim, Lower Kit
- WQ50260: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP50260 License Plate Bezel
Which SRX years does LP50260 fit?
2010 through 2016, 4-door SUV.
What is the TH50260 width?
Its note and width field disagree, and the entry is flagged. Check its photos or call 877-752-3811. It doesn't affect the bezel.
Which pillar kit includes the front triangle?
PP50262, the eight-piece kit.
How does the bezel attach?
3M automotive-grade acrylic foam tape, directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
How many pieces?
One.
