Product Description
Cadillac SRX 2010-2016 Stainless Molding Insert Kit, 8 Pieces, 1 Inch (MI50260)
MI50260 is an eight-piece molding insert kit for the Cadillac SRX 4-door SUV, 2010 through 2016. The strips are polished 304 stainless steel at 1 inch wide, and they lay over the SRX's existing body side moldings with 3M tape.
Eight pieces: plan the layout first
The catalog doesn't say where each of the eight strips goes, so the product photos are the plan. Before you order, compare them with your SRX: the number of molding sections, their shape, and their condition. Then measure the flat face of one molding and compare it with 1 inch. If anything doesn't match, call Quality Automotive Trims at 877-752-3811 with MI50260.
Fitment
Cadillac SRX, 2010 to 2016, tagged 4-door SUV. One row, and the title agrees. SRX models from 2010 through 2016 are on the row.
Moldings in good shape
These strips don't replace anything; they sit on top of what's there. A cracked, lifting or patched molding should be repaired before ordering, and old adhesive or wax will need to come off during prep. If a molding has been replaced with something that looks different from the photos, call first.
Material
For the 2010-2016 SRX, the eight inserts are 26 gauge 304 stainless, polished and made in the USA. Each mounts with 3M automotive-grade acrylic foam tape over the existing molding surface, so the Cadillac needs no drilling.
Installing eight strips
Sort them on a towel by the photos and write a position on each liner. Fix any damaged moldings and remove old adhesive. Wash, dry and alcohol-wipe each molding. For each strip, dry-fit with the liner on, center it on the molding, and set painter's tape at both ends. Peel, place and press firmly from end to end. Fit a few strips, then sight along them before starting the rest. The Installation tab gives the temperature range for the tape.
SRX parts on this sheet
Nine other parts share the SUV tag. GC50260 is a 1-piece gas door cover trim; LP50260 a 1-piece license plate bezel. Pillar posts come as PP50260 (4 pieces), PP50261 (6) and PP50262 (8, including a front triangle piece). RD50260 is a 1-piece rear deck accent noted at 1.125" width by 51.5" length for this SUV listing; check its photos. TH50260 is an 8-piece rocker panel lower kit that spans from the bottom of the door up to the specified width; its tapered width note is garbled and its width field reads 0.75, so we've flagged it and suggest calling before ordering that kit. WQ50260 and MC50260 are cross-listed by number only.
Why moldings first
If you're planning several of these parts, the molding inserts are a reasonable place to start. They don't involve the windows or lights, and they're all one width, so you learn how the 3M tape handles before tackling larger pieces.
Care
Mild soap, water and a soft cloth keep polished stainless clean. Avoid abrasive pads and steel wool. Questions? 877-752-3811.
MI50260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI50260 |
| UPC | 691821283996 |
| Part type | Molding Insert |
| Pieces in kit | 8 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2016 Cadillac SRX |
Fitment: MI50260
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac SRX | 2010-2016 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2016 Cadillac SRX
- GC50260: 1-piece Gas Door Cover Trim
- LP50260: 1-piece License Plate Bezel
- PP50260: 4-piece Pillar Post Trim
- PP50261: 6-piece Pillar Post Trim
- PP50262: 8-piece Pillar Post Trim
- RD50260: 1-piece Rear Deck Accent
- TH50260: 8-piece Rocker Panel Trim, Lower Kit
- WQ50260: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Molding Insert
- Unpack all 8 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI50260 Molding Insert
What does MI50260 fit?
The Cadillac SRX 4-door SUV, 2010 through 2016.
How many strips, and how wide?
Eight strips at 1 inch.
Where does each strip go?
The catalog doesn't say. Follow the photos and label each liner.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What material is it?
Polished 304 stainless steel, 26 gauge, made in the USA.
