Product Description
Cadillac SRX 2010-2016 Rear Deck Accent, 1.125 x 51.5-Inch Stainless (RD50260)
RD50260 comes with both dimensions in the data: 1.125 inches wide by 51.5 inches long. That makes it easy to check against the back of a Cadillac SRX before buying. It fits the 4-door SUV from 2010 through 2016 and is a single piece of mirror-polished 304 stainless steel, made in the USA, with 3M tape.
Measure your gate
Because the length is published, you can test it directly. Run a tape measure, or a 51.5-inch strip of painter's tape, across the gate where the photos show the accent. If it spans the way you want, the size is right.
SRX years
2010, 2011, 2012, 2013, 2014, 2015, 2016.
The SRX list
- LP50260, a license plate bezel
- GC50260, a gas door cover trim
- MI50260, an eight-piece body molding insert kit, 1 inch
- PP50260, PP50261, PP50262: pillar post trim in four, six, and eight pieces; the eight-piece kit includes the front triangle piece
- TH50260, an eight-piece lower rocker kit spanning up from the bottom of the door
- WQ50260, a four-piece wheel well set with 3M adhesive and no black rubber gasket edging
- MC50260, a two-piece mirror cover set, top half only
A rocker note to clarify
The TH50260 listing gives a 0.75-inch width but also a tapered-width note that reads unclearly in the data. Call before ordering it so the measurement can be confirmed.
Liftgate, not trunk
The category is rear deck accent. On the SRX it goes on the rear liftgate.
Material
The SRX accent is 26-gauge 304 stainless, mirror polished, with no plating.
Mounting
Mounting the SRX strip takes 3M automotive-grade acrylic foam tape on the existing surface. According to QAA, this tape will hold for a lifetime with no harm to the Cadillac.
Clean the full length
Over fifty inches of tape needs a clean path end to end. Wash and dry, then wipe the whole length with a residue-free cleaner until the cloth stays clean. Repair any chips along the line.
Placing a long strip
A helper makes this easier. With the liner on, hold the strip in place, measure from each end to the gate edges, and mark the line with painter's tape along the full length.
Pressing
On a dry, mild day, peel the liner and start at the center, pressing toward each end. Don't let the ends touch until you reach them. The Installation tab has full steps.
Care
The SRX gets its first wash after a few days; use mild soap and a soft cloth.
Why stainless
Solid 304 stays the same color all the way through; check the other SRX listings for their finish.
What it is
A decorative accent; it does not replace any factory part.
Mirror covers, top half
If you're buying MC50260, note the listing describes the top half only. The lower part of each mirror keeps its existing finish, which the photos show. The wheel well set is noted as mounting with 3M adhesive and no black rubber gasket edging.
Part details
SRX deck accent RD50260, UPC 691821354320. Quality Automotive Trims, 877-752-3811.
RD50260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | RD50260 |
| UPC | 691821354320 |
| Part type | Rear Deck Accent |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.125" |
| Coverage / notes | 1.125" Width X 51.5" Length |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2016 Cadillac SRX |
Fitment: RD50260
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac SRX | 2010-2016 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2016 Cadillac SRX
- GC50260: 1-piece Gas Door Cover Trim
- LP50260: 1-piece License Plate Bezel
- MI50260: 8-piece Molding Insert
- PP50260: 4-piece Pillar Post Trim
- PP50261: 6-piece Pillar Post Trim
- PP50262: 8-piece Pillar Post Trim
- TH50260: 8-piece Rocker Panel Trim, Lower Kit
- WQ50260: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Rear Deck Accent
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: RD50260 Rear Deck Accent
How long is RD50260?
51.5 inches long and 1.125 inches wide.
Which SRX does it fit?
The Cadillac SRX 4-door SUV, 2010 through 2016.
Which pillar kit includes the front triangle?
PP50262, the eight-piece kit.
Does the mirror cover set cover the whole mirror?
No. MC50260 is listed as top half only.
How is it installed?
3M tape.
