Product Description
Cadillac SRX 2010-2016 Stainless Wheel Well Accent Trim WQ50260, 4 Pieces, No Gasket Edging
WQ50260 is a four-piece polished stainless steel Wheel Well Accent Trim for the 2010-2016 Cadillac SRX 4-door SUV. The listing reads "With 3M adhesive installation NO black rubber gasket edging", and the record gives no width.
Bare polished edges
This set carries no black rubber gasket edging, so the stainless runs right to its edge with nothing between it and the arch. The photos show the finished look.
Which SRX
The fitment line is the SRX SUV, 2010-2016. Confirm your model year on your paperwork before you buy.
Material
The SRX set has no rubber gasket edging; four arch strips of USA-made polished 26 gauge 304 stainless go on with 3M automotive-grade acrylic foam tape alone. QAA states the tape will hold for a lifetime without harming the 2010-2016 Cadillac.
SRX group
TH50260 is an eight-piece lower kit that spans from the bottom of the door up; its width note is unclear in the record, so ask 877-752-3811 for the figure. MI50260 is an eight-piece body molding insert kit at 1". Window trim comes as pillar sets PP50260 (4), PP50261 (6) and PP50262 (8, "Includes Front Triangle piece"). MC50260 is a two-piece mirror cover set, "Top Half only". There's also a gas door cover, a license plate bezel and RD50260, a rear deck accent at "1.125" Width X 51.5" Length". Fit any rocker or insert parts before the arches.
Before ordering
Two checks: the year must be 2010-2016, and you should be happy with bare stainless edges. With no width listed, judge the look from the photos or ask for a measurement.
Getting the arch paint spotless
Without rubber edging, every flaw under the stainless sits right at its visible edge, so this prep matters. Park in shade on a cool day. Rinse each opening, wash it with a soft mitt, rinse again, and blot it dry. Leave the lip to drip out. Then run a gloved fingertip slowly along the band the trim will cover; a grain of grit, a ridge of old tape or a lifted chip will all be felt before they're seen. Clear them. Wipe the band with wax-and-grease remover. Lay a thin strip of painter's tape just outside the band as a guide line, then finish with isopropyl alcohol inside it.
Setting the stainless
Offer each piece to its corner on its liner and hold it with two small tabs. With no rubber lip to locate it against the opening, use the guide tape and the photos: the gap between stainless and opening should look even from end to end. Release the liner a short length at a time from the lower end, pressing with the pad of a finger along the curve. Peel the guide tape away once the piece is fully down, and fit the next opening.
Arrival and care
Count four pieces on arrival and look along each edge for dents. After fitting, leave washing for a day; then mild soap and a soft cloth, keeping pressure-washer spray off the stainless edges. Questions: 877-752-3811.
The 2010-2016 SRX kit carries part WQ50260 and UPC 691821612079. Our line: 877-752-3811.
WQ50260 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | WQ50260 |
| UPC | 691821612079 |
| Part type | Wheel Well Accent Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | With 3M adhesive installation NO black rubber gasket edging |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2016 Cadillac SRX |
Fitment: WQ50260
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac SRX | 2010-2016 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2016 Cadillac SRX
- GC50260: 1-piece Gas Door Cover Trim
- LP50260: 1-piece License Plate Bezel
- MI50260: 8-piece Molding Insert
- PP50260: 4-piece Pillar Post Trim
- PP50261: 6-piece Pillar Post Trim
- PP50262: 8-piece Pillar Post Trim
- RD50260: 1-piece Rear Deck Accent
- TH50260: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Wheel Well Accent Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: WQ50260 Wheel Well Accent Trim
Does WQ50260 have gasket edging?
No. The listing says "NO black rubber gasket edging".
Which SRX does it fit?
The 2010-2016 Cadillac SRX 4-door SUV.
How wide is it?
No width is listed; see the photos or call 877-752-3811.
What is it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
