Product Description
Cadillac CT6 2016-2018 Stainless License Plate Bezel (LP56230)
LP56230 is a one-piece License Plate Bezel for the Cadillac CT6 4-door sedan, model years 2016 through 2018. The catalog lists one row for it, three years long, with no exclusions. Three other CT6 parts are linked to it, and two of them are cataloged for the same end of the car, so this page focuses on how the rear pieces fit together as a plan.
RD56230 is a one-piece Rear Deck Accent at 0.75". LB56230 is a two-piece License Bar Extension Trim at 1.5". The third, HL56230, is a two-piece Head Light Accent Trim for the front. The license bar extension is the one to think about most. Its name ties it to the plate, like the bezel, yet the catalog never says what it extends or where its two pieces sit, and none of the records explains how it relates to LP56230. Look at the photos of both, and if you buy both, hold them up together with the deck trim before anything is stuck down. Each listing describes its own finish and mounting.
Here's a sensible order for a full rear set. Stage every piece first and step back to judge them as a group. Install the bezel next, since it frames the plate and gives you a fixed reference. After that, fit whichever other rear trim you bought for the CT6, checking the spacing against the bezel. If anything in that plan looks uncertain in the photos, call Quality Automotive Trims at 877-752-3811 with the SKUs before you order.
The bezel is 26-gauge 304 stainless steel, mirror polished and made in the USA. There's no plating on it to fade or chip, and the thin sheet hugs the surface. The catalog gives no dimensions for it, so rely on the product photos for its outline.
It mounts with 3M automotive-grade acrylic foam tape and installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Paint condition is the one thing that can undermine that, so inspect the finish around the plate and repair chips or lifting clear coat before you start.
Then clean: remove leftover adhesive, wash with soap and water, dry thoroughly and wipe with rubbing alcohol. Position the bezel with the liner on, view it from behind the sedan, mark it with painter's tape, then peel, align and press firmly along every edge. The Installation tab covers the full sequence and the tape's temperature range.
Before ordering, check your records for the model year. If you run a plate frame, try it at the staging step. Afterward, mild soap, water and a soft cloth keep the polish clean, and abrasive pads stay in the drawer. Quote LP56230 when you call 877-752-3811.
A dry, mild day is the best time for the job, and the bond does better if it's left alone for a while before the first wash. With only one piece and no hardware, the bezel itself takes very little time once the surface is ready.
LP56230 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP56230 |
| UPC | 652012474678 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2016-2018 Cadillac CT6 |
Fitment: LP56230
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac CT6 | 2016-2018 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2016-2018 Cadillac CT6
- RD56230: 1-piece Rear Deck Accent
- LB56230: 2-piece License Bar Extension Trim
- HL56230: 2-piece Head Light Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP56230 License Plate Bezel
Which Cadillac CT6 fits LP56230?
The 4-door sedan, model years 2016 through 2018.
How does LB56230 relate to this bezel?
The catalog doesn't say. Stage both together and compare photos, or call 877-752-3811.
What other CT6 parts are listed?
RD56230 deck trim, LB56230 license bar extension trim and HL56230 headlight accent trim.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
