Product Description
Cadillac CTS Sport Wagon 2010-2011 Stainless License Plate Bezel (LP50251)
LP50251 is cataloged for one body style of the Cadillac CTS: the 4-door Sport Wagon. Its fitment row covers just two model years, 2010 and 2011, and the product title gives the same two years, so those are the full extent of the listing. A CTS sedan or coupe is not on it.
Because the row is specific to the Sport Wagon, this is not the bezel to choose for a CTS with a different body. If you're unsure which CTS you have, your records will tell you, and Quality Automotive Trims can help at 877-752-3811. Mention SKU LP50251 when you call.
Construction
The bezel is one piece of 26-gauge 304 stainless steel, polished to a mirror finish and made in the USA. It frames the plate area. Stainless of this grade doesn't depend on chrome plating for its shine, which means nothing to flake off as the years go by, and the thin sheet hugs the surface it's mounted to.
There are no other parts listed on this page and no notes on the row. Everything the catalog says about the fit is in the paragraph above. For the finer points, such as how the frame shape relates to the area around your plate, the product photos are the best reference. Set them alongside your own wagon and compare.
Attachment
Nothing on the CTS Sport Wagon is drilled: 3M automotive-grade acrylic foam tape holds the bezel over the existing surface. Per QAA, the tape will hold for a lifetime and won't damage the wagon's surface.
Good adhesion starts with good paint. Inspect the plate area, and if you find chips or clear coat that's starting to lift, have it repaired before installing. Take off any adhesive left by an old frame or sticker. Then wash the surface, dry it completely and wipe it with rubbing alcohol so no wax or oil remains. The Installation tab sets out each step and the temperature range the tape needs.
Placement
Do a trial fit before the liner comes off. Hold the bezel where it will go, back away from the wagon, and adjust until it sits evenly. Mark the edges with painter's tape. When you're satisfied, peel the liner, line the bezel up with your marks, and press it down firmly from end to end.
A short job
With one piece and no hardware, the whole installation is mostly preparation. Plan for a dry, mild day, give yourself time to clean the area properly, and don't rush the trial fit, because the foam tape grabs quickly once it touches clean paint. After it's pressed on, leave it alone for a while before washing so the bond has a chance to settle.
Care
Wipe it with a soft cloth and mild soap and water. Scouring pads and polishing compounds aren't needed. A plate frame, if you use one, should be checked during the trial fit to be sure it stays off the bezel.
LP50251 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | LP50251 |
| UPC | 757565505470 |
| Part type | License Plate Bezel |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2011 Cadillac CTS Sport Wagon |
Fitment: LP50251
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac CTS Sport Wagon | 2010-2011 | 4-door, Sport Wagon |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Installation tips: License Plate Bezel
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: LP50251 License Plate Bezel
Which years does LP50251 fit?
The CTS Sport Wagon, 4-door, model years 2010 and 2011.
Will it fit other CTS body styles?
This listing only covers the Sport Wagon. Call 877-752-3811 for other body styles.
Does it need drilling?
No. It uses 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
What's it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
How many pieces?
One.
