Product Description
Ford Mustang 2005-2009 Tapered Stainless Hood Accent Trim (HT45351)
HT45351 is a one-piece stainless hood accent for the Ford Mustang, listed for the 2-door Coupe and Convertible, model years 2005 through 2009. All five years appear on a single Fitment row. The catalog gives the width as tapered, from 1" to 1.5", so this is a slim accent that widens slightly along its length rather than a constant-width strip. The Mustang hood trim is polished 304 stainless steel at 26 gauge, made in the USA. On the Mustang's hood, 3M automotive-grade acrylic foam tape keeps the trim in place.
The taper matters during installation. A tapered piece has a narrow end and a wide end, and it only looks right when they're in the correct places. The catalog doesn't describe the exact position on the hood, so check the product photos to see which end goes where and how the line runs. Dry-fit the accent on the hood with its liner on before you do anything else.
The trim installs directly over the existing surface, so there's no drilling. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Paint condition is what makes that possible. Check the hood where the accent will sit and repair chips, peeling or dull clear coat and blisters before you start.
To install, wash the area with soapy water, rinse, dry fully and wipe with a degreaser. Lay the accent in position, check it from the front of the Mustang and once from inside, and set painter's tape at both ends. A straight, even line is what people notice on a hood, so take a moment to measure from a fixed edge at both ends if the photos show the accent running parallel to one. Peel the liner starting at the narrow end, press that end onto its mark, and work toward the wide end, pressing firmly as you go. Go back over the full length after a minute. The Installation tab has more detail.
The Mustang sheet lists four other parts for the coupe and convertible. DH45351 is a four-piece door handle cover kit, and TL45351 is a two-piece set of tail light bezels. Along the sides, TH45351 is a six-piece lower rocker kit at 3.5 inches that spans from the bottom of the door up, and WQ45351 is a four-piece wheel well accent set at 0.75 inches. Together with the hood accent, those cover the front, sides and rear of the car. Check each listing for its finish and photos before ordering a set.
On the 2005-2009 Mustang, polished 304 stainless lays a bright line along the hood, and the 26 gauge sheet stays slim. Fit it on a dry, mild day and let the tape set overnight before washing. After that, clean with mild soap and a soft cloth, never abrasive pads.
Check your model year before ordering, since the row covers 2005 through 2009; both the coupe and convertible are listed. Questions about the taper or fit? Call Quality Automotive Trims at 877-752-3811 and mention HT45351. The UPC is on the Specs tab.
HT45351 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT45351 |
| UPC | 691821677412 |
| Part type | Hood Accent Trim |
| Pieces in kit | 1 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1" to 1.5" tapered |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2005-2009 Ford Mustang |
Fitment: HT45351
| Vehicle | Years | Body style |
|---|---|---|
| Ford Mustang | 2005-2009 | 2-door, Coupe, Convertible |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2005-2009 Ford Mustang
- DH45351: 4-piece Door Handle Cover Kit
- TH45351: 6-piece Rocker Panel Trim, Lower Kit
- TL45351: 2-piece Tail Light Bezels
- WQ45351: 4-piece Wheel Well Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hood Accent Trim
- Unpack the piece and hold it in position to confirm the fit before mounting it.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Step back and check alignment before pressing along the full length of the piece.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT45351 Hood Accent Trim
Which Mustang does HT45351 fit?
The 2005-2009 Ford Mustang 2-door Coupe and Convertible.
How wide is it?
Tapered from 1" to 1.5".
How many pieces are included?
One.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
