Product Description
Cadillac XT4 2019-2025 Stainless Hood Accent Trim, 2 Pieces (HT59210)
HT59210 is a two-piece stainless hood accent trim for the Cadillac XT4 4-door SUV, model years 2019 through 2025. The Fitment row lists seven years for this one body. Both pieces are polished 304 stainless steel at 26 gauge, made in the USA, and each has 3M automotive-grade acrylic foam tape.
The catalog doesn't give a width or describe exactly where the two accents sit on the hood, so treat the product photos as the plan. Compare the two pieces with the photos to tell which is which, and hold each against your hood with the liner on to see how it lines up. If the fit or position isn't clear, call us before going any further.
No drilling is needed; the trim installs directly over the existing surface. QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle. Paint condition is the deciding factor, so look at the hood where each piece will sit and repair chips, flaking clear coat and blisters beforehand.
Getting two pieces to look balanced is the whole job. Clean the area with soapy water, rinse, dry, then wipe with a degreaser. Place both accents with their liners on and look at them from directly in front of the SUV. If the photos show an even layout, measure from a fixed edge to each piece and match the distances. Tape the ends with painter's tape. Peel and press one piece firmly along its full length, then the other, and finish with a second firm press on both after a minute. The Installation tab has more detail.
The XT4 sheet lists eight other parts for the same 4-door SUV. Four pillar post sets are listed: PP59210 with four pieces, PP59211 with six, PP59212 with eight, and PP59213 with ten, which includes the small rear triangle. AT59210 is a four-piece body side molding accent kit at 1.5 inches wide. At the back, RD59210 is a one-piece rear deck accent at 0.875 inches, and LP59210 is a one-piece license plate bezel. BI59210 is listed by number only. Check each listing for its finish and photos before ordering more than one piece.
Polished 304 stainless gives a bright accent on the hood, and 26 gauge keeps the pieces slim. Install on a dry, mild day, and let the tape set overnight before washing. Afterward, use mild soap and a soft cloth, and avoid abrasive pads.
If you're planning a fuller set, the hood accent is a good front-end piece to start with, since it's a short job and lets you see the polished finish against your XT4's paint before choosing a pillar set or side accent. Check your XT4's model year; the row covers 2019 through 2025. Something about your XT4 not covered here? We're on 877-752-3811.
Questions about placement or the pillar sets? Call Quality Automotive Trims at 877-752-3811 and mention HT59210; we can walk through the photos with you. The UPC is on the Specs tab.
HT59210 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | HT59210 |
| UPC | 691821533213 |
| Part type | Hood Accent Trim |
| Pieces in kit | 2 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2019-2025 Cadillac XT4 |
Fitment: HT59210
| Vehicle | Years | Body style |
|---|---|---|
| Cadillac XT4 | 2019-2025 | 4-door, SUV |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2019-2025 Cadillac XT4
- PP59210: 4-piece Pillar Post Trim
- PP59211: 6-piece Pillar Post Trim
- PP59212: 8-piece Pillar Post Trim
- PP59213: 10-piece Pillar Post Trim
- RD59210: 1-piece Rear Deck Accent
- AT59210: 4-piece Body Side Molding Accent Trim
- LP59210: 1-piece License Plate Bezel
- BI59210: 1-piece Rear Bumper Trim Accent
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Hood Accent Trim
- Unpack all 2 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: HT59210 Hood Accent Trim
Which XT4 years does HT59210 fit?
The 2019-2025 Cadillac XT4 4-door SUV.
How many pieces are included?
Two pieces of hood accent trim.
Where do they go?
The catalog doesn't describe the exact positions. Use the product photos, or call 877-752-3811.
What is it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
Does it need drilling?
No. It installs directly over the existing surface with 3M automotive-grade acrylic foam tape.
How long does the tape hold?
QAA states the tape will hold for a lifetime without causing any damage to the surface of the vehicle.
Which pillar set includes the rear triangle?
PP59213, the ten-piece set, includes the small rear triangle.
