Product Description
2017-2022 Super Duty Regular Cab With 6 3/4' Bed: Stainless Molding Insert Kit, 10 Pieces (MI57321)
MI57321 is tagged for the Ford F-250 & F-350 Super Duty Regular Cab, 2-door, with a 6 3/4' bed, model years 2017 through 2022. The title carries the trucks and years; the cab and bed tags are in the row. The kit is ten polished 304 stainless molding insert strips, each 1.5 inches wide.
The bed tag is the key
Most of the parts shown with details on this sheet are tagged for the Regular Cab with the 8' bed, including MI57320, the 10-piece, 1.5 inch insert kit for that configuration. MI57321 is the one tagged for the 6 3/4' bed. So measure. Close the tailgate and run a tape along the bed floor from the inside of the front wall to the inside of the tailgate, or check the truck's build paperwork. If you have the 8' bed, look at MI57320 instead. If you're unsure, call Quality Automotive Trims at 877-752-3811 with MI57321.
Other parts on this sheet
These are shown with details, and all carry Regular Cab 8' bed tags, so check each listing against your truck before buying: WS57320, a 2-piece window sill trim set; GC57320, a 1-piece gas door cover trim; TH57320, a 10-piece rocker panel upper kit at 4.5 that spans from the bottom of the molding down; LB57320, a 1-piece tailgate handle accent trim, upper accent strip, no rear camera cut out, at 1.188; TGH57320, a 1-piece tailgate handle accent trim, lower accent, pull only; and WQ57320, a 10-piece wheel well accent trim at 1.5. Several mix "2-door, 4-door" with Regular Cab in their tags, which we've flagged. Eleven more numbers are cross-listed without details.
Kit details
Ten strips, 1.5 inches wide, in 26 gauge 304 stainless steel with a polished finish, made in the USA. Mounting is 3M automotive-grade acrylic foam tape, directly over the existing surface, with no drilling. The record doesn't say where each strip goes; the photos show the layout.
Molding check
These strips lay over existing moldings. Look at each for cracks, lifting ends and old adhesive, and repair or clean them first. Measure the flat face of one and compare it with 1.5 inches and the photos.
Install
On a dry, mild day, wash, dry and wipe each molding with rubbing alcohol. Number the ten liners using the photos. Dry-fit each strip with the liner on and center it, then mark both ends with painter's tape. Peel, place and press firmly from end to end. Fit a few, sight along them from the front corner, then carry on with the rest. The Installation tab lists the temperature range.
Why we point you to the photos
The record doesn't describe where each of the ten strips sits on the truck. The photos do, so keep them open on a phone during the dry fit and match each strip before peeling its liner.
Care
Mild soap, water and a soft cloth keep polished stainless clean. Avoid steel wool and abrasive pads. Questions? 877-752-3811.
MI57321 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI57321 |
| UPC | 840251602253 |
| Part type | Molding Insert |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2022 Ford F-250 & F-350 Super Duty |
Fitment: MI57321
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-250 & F-350 Super Duty | 2017-2022 | 2-door, Pickup Truck, Regular Cab, 6 3/4' Bed |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2022 Ford F-250 & F-350 Super Duty
- WS57320: 2-piece Window Sill Trim Set
- GC57320: 1-piece Gas Cap Door Trim
- MI57320: 10-piece Molding Insert
- TH57320: 10-piece Rocker Panel Trim, Upper Kit
- LB57320: 1-piece Tailgate Handle Accent Trim
- TGH57320: 1-piece Tailgate Handle Accent Trim
- WQ57320: 10-piece Wheel Well Accent Trim
- RT57320: 1-piece Tailgate Accent Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Molding Insert
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI57321 Molding Insert
What does MI57321 fit?
The 2017-2022 Ford F-250 & F-350 Super Duty Regular Cab, 2-door, with a 6 3/4' bed.
Which kit is for the 8' bed Regular Cab?
MI57320, a 10-piece kit at 1.5 inches.
How many strips are in MI57321?
Ten, each 1.5 inches wide.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's the material?
Polished 304 stainless steel, 26 gauge, made in the USA.
