Product Description
Ford F-250 & F-350 Super Duty Regular Cab 8' Bed (2017-2022) Stainless Molding Insert Kit, 10 Pieces (MI57320)
MI57320 is a ten-strip molding insert kit for the Ford F-250 & F-350 Super Duty Regular Cab, 2-door, with the 8' bed, model years 2017 through 2022. The title names both trucks, as the row does, though it leaves the cab and bed to the row. The strips are polished 304 stainless steel, 1.5 inches wide.
The Regular Cab 8' bed set
Several parts on this sheet carry the same Regular Cab 8' bed tag, so if you're planning more than the moldings, here's what's shown with details:
- TH57320: 10-piece rocker panel upper kit at 4.5, spanning from the bottom of the molding down to the specified width
- WQ57320: 10-piece wheel well accent trim at 1.5
- WS57320: 2-piece window sill trim set
- GC57320: 1-piece gas door cover trim
- RT57320: 1-piece tailgate accent trim at 2
- LB57320: 1-piece tailgate handle accent trim, upper accent strip, no rear camera cut out, at 1.188
- TGH57320: 1-piece tailgate handle accent trim, lower accent, pull only
Some of those, like GC57320 and the tailgate parts, carry a tag that mixes "2-door, 4-door" with "Regular Cab, 8' Bed," which we've flagged. LB57320's prefix also doesn't match its tailgate handle description. Eleven more numbers, including MI57321, MI57323 and MI57324, are cross-listed without details.
Fit for this kit
Year 2017 to 2022, F-250 or F-350 Super Duty, Regular Cab, 8' bed. Confirm the bed with a tape measure along the floor from the front wall to the closed tailgate, or from build paperwork. If anything differs, call Quality Automotive Trims at 877-752-3811 with MI57320.
Strips
Ten strips, 1.5 inches wide, 26 gauge 304 stainless steel, polished, made in the USA. They mount with 3M automotive-grade acrylic foam tape directly over the existing surface; no drilling. The record doesn't assign each strip a position; follow the photos.
Installing
Inspect the moldings and fix any cracks, lifting ends or old adhesive. Wash, dry and alcohol-wipe. Number the ten liners by position. Dry-fit each strip with the liner on, center it, and set painter's tape at both ends. Peel and press firmly from end to end. Do a few strips, sight along them from the front corner, then the rest. Fitting TH57320 too? Its note says it spans down from the bottom of the molding, so look at both sets of photos side by side before starting. The Installation tab lists the temperature range.
Molding check before ordering
The strips lay over the moldings already on the truck, so those moldings need to be present, intact and similar to the ones in the photos. Measure the flat face of one with a ruler and compare it with 1.5 inches. If a molding has been replaced or damaged, call before ordering so we can talk through it. A helper holding the far end of each strip during the dry fit also makes the job easier.
Care
Mild soap, water and a soft cloth. No steel wool or abrasive pads. Questions? 877-752-3811.
MI57320 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI57320 |
| UPC | 652012474685 |
| Part type | Molding Insert |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 1.5" |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2017-2022 Ford F-250 & F-350 Super Duty |
Fitment: MI57320
| Vehicle | Years | Body style |
|---|---|---|
| Ford F-250 & F-350 Super Duty | 2017-2022 | 2-door, Pickup Truck, Regular Cab, 8' Bed |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2017-2022 Ford F-250 & F-350 Super Duty
- WS57320: 2-piece Window Sill Trim Set
- GC57320: 1-piece Gas Cap Door Trim
- TH57320: 10-piece Rocker Panel Trim, Upper Kit
- LB57320: 1-piece Tailgate Handle Accent Trim
- TGH57320: 1-piece Tailgate Handle Accent Trim
- WQ57320: 10-piece Wheel Well Accent Trim
- RT57320: 1-piece Tailgate Accent Trim
- SGR57321: 10-piece SUPER DUTY Hood Letter Insert
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Molding Insert
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI57320 Molding Insert
What does MI57320 fit?
The 2017-2022 Ford F-250 & F-350 Super Duty Regular Cab, 2-door, with an 8' bed.
How many strips, and how wide?
Ten strips at 1.5 inches.
Is the rocker kit TH57320 included?
No. TH57320 is a separate 10-piece rocker panel upper kit with its own listing.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's it made of?
Polished 304 stainless steel, 26 gauge, made in the USA.
