Product Description
Chevrolet Malibu 2013-2015 Tapered Stainless Molding Insert Kit, 0.375 to 0.6875 Inch (MI53105)
MI53105 is a fine-scale kit. Its four polished 304 stainless strips taper from 0.375 inches at the narrow end to 0.6875 inches at the wide end, and they're listed for the Chevrolet Malibu 4-door sedan from 2013 through 2015.
Narrow and tapered
Both widths are under an inch, and the strip changes width along its length. That combination means the photos matter a great deal. The catalog doesn't say which end faces forward or where each strip goes, so compare the pictures with your Malibu's moldings before you order. A ruler across the flat face of a molding near each end, compared with 0.375 and 0.6875 inches, tells you whether the strip will sit within the face. If the shapes don't match, call Quality Automotive Trims at 877-752-3811 with MI53105.
Fitment
Chevrolet Malibu, 2013 to 2015, 4-door sedan. One row, three model years, and the title says the same. This Malibu set is for 2013 to 2015 cars.
Specs
The Malibu set is four strips of polished 26 gauge 304 stainless steel, made in the USA, held over the existing moldings with 3M automotive-grade acrylic foam tape and no drilling. Prep is covered on the Installation tab.
Installing narrow tapered strips
Clean thoroughly, since a thin strip has less tape to work with: soap and water, a full dry, then rubbing alcohol, allowed to flash off. On each liner, write the position and draw an arrow toward the wide end. Dry-fit each strip with its liner on and check that the taper follows the molding and the gap to each edge stays even. Mark the ends with painter's tape. Peel, set, and press firmly along the full length, wide end first. Look along the strips when they're done. The Installation tab gives the temperature range; choose a dry, mild day.
Two wheel well options linked
The sheet links two wheel well accent trims for the same Malibu sedan. WQ53105 is 4 pieces at 1, noted "Cut to fit with Rocker kit sold separately." WQ53106 is 4 pieces noted "Full Length." The notes suggest one is meant to work alongside a rocker kit and the other not, but the sheet doesn't name the rocker kit, so read both listings and call if you're unsure which to pair with your plans.
Molding condition
The strips sit on top of the moldings. Fix any cracks or loose ends and remove old adhesive or wax before you start, because the tape bonds only to a clean, sound surface.
Getting the inserts to match
Tapered strips have to match each other. After fitting the first strip, measure where its wide end sits relative to a fixed point, such as the door edge, and repeat that measurement for the matching strip. Matching numbers mean the inserts sit at the same height all round. A helper standing back from the car can confirm the line before you press.
Care
Use mild soap, water and a soft cloth, and keep steel wool and abrasive pads away from the finish.
MI53105 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | MI53105 |
| UPC | 691821466382 |
| Part type | Body Molding Insert Trim Kit |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Width | 0.375" to 0.6875" tapered |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2015 Chevrolet Malibu |
Fitment: MI53105
| Vehicle | Years | Body style |
|---|---|---|
| Chevrolet Malibu | 2013-2015 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2015 Chevrolet Malibu
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Body Molding Insert Trim Kit
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: MI53105 Body Molding Insert Trim Kit
What does MI53105 fit?
The Chevrolet Malibu 4-door sedan, 2013 through 2015.
How wide are the strips?
They taper from 0.375 inches to 0.6875 inches.
Which end faces forward?
The catalog doesn't say. Follow the photos or call 877-752-3811.
How many pieces?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
