Product Description
Largest Sienna Pillar Kit: Ten Stainless Pieces Incl. Front-Front-Front Pillar, 2021-2026 (PP71153)
Ten polished stainless steel covers make PP71153 the biggest of QAA's four Toyota Sienna pillar kits. It is listed for the 4-door Sienna minivan, model years 2021 through 2026, and the catalog notes that it includes a front-front-front pillar piece.
Reading the catalog note
QAA uses three levels of naming across the Sienna range. The eight-piece PP71152 "includes front-front pillar piece." This ten-piece kit "includes front-front-front pillar piece." The four and six-piece kits, PP71150 and PP71151, have no note. The data does not translate those labels into a diagram, so the most accurate guide is the photos on this page. If anything is unclear, QAA will describe the pieces by phone.
Why the fullest kit
For owners who want the window pillars dressed as completely as QAA offers for the Sienna, ten pieces is the answer. The stainless becomes a defining feature of the van's side profile.
Vehicle and years
Toyota Sienna, 4-door minivan, 2021 through 2026. No other vehicles are listed. The Fitment tab shows the entry.
The material
All ten covers are made in the USA from 304 stainless steel at 26 gauge and polished to a mirror shine. Because the shine is in the metal, there is no coating to wear off, and every piece matches.
Mounting method
The ten Sienna covers, front-front-front pillar piece included, go over the existing surface with 3M automotive-grade acrylic foam tape. According to QAA, the tape will hold for a lifetime without harming the minivan.
A plan for ten pieces
- Fit the Sienna covers on a dry, mild day out of direct sun.
- Lay out the ten Sienna covers and match each to the photos.
- Clean, dry and de-wax every Sienna pillar.
- Dry-fit each piece, then peel and press firmly.
- Fit and check each Sienna cover before the next.
- The Sienna should go a few days before washing.
The Installation tab has full details.
Patience pays
Step back often, and do not peel a liner until the cover sits where you want it.
Care
Rinse first to lift grit, then wash with mild soap and dry with a soft towel. Keep abrasive pads off the polish, and dry the covers fully so water doesn't spot them.
What pillar trim does
Pillars are the upright posts that frame the side windows and support the roof. Dressing them in mirror stainless gives the glass a bright outline that stands out against the paint. The covers are purely cosmetic and go over the original surface, which is left as it was.
Before you order
Confirm that your Sienna is a 2021 or later model, using the year on your registration. Then compare the photos on this listing with the eight-piece PP71152 to make sure the larger coverage is what you want.
One complete set
This kit is complete on its own; there is no need to combine it with the smaller Sienna kits. If ten feels like more stainless than you want, the eight-piece PP71152 is the next step down.
Reference and help
Sienna owners can order PP71153, UPC 840251601898; the Specs tab shows material and piece count, and Quality Automotive Trims picks up at 877-752-3811.
PP71153 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP71153 |
| UPC | 840251601898 |
| Part type | Pillar Post Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes front-front-front pillar piece |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Toyota Sienna |
Fitment: PP71153
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2021-2026 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2026 Toyota Sienna
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP71153 Pillar Post Trim
Is PP71153 the largest Sienna pillar kit?
Yes. It has ten pieces and is noted as including a front-front-front pillar piece.
Which Sienna years fit?
The 4-door Toyota Sienna minivan, 2021-2026.
Do I need the smaller kits too?
No. Each kit is a complete set on its own.
How is it installed?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
