Product Description
Six-Piece Pillar Covers for the 2021-2026 Toyota Sienna, Mirror Stainless (PP71151)
PP71151 is six polished stainless steel covers for the window pillars of the 4-door Toyota Sienna minivan, listed for model years 2021 through 2026. It is the second of four Sienna pillar kits QAA offers.
How it compares
The four-piece PP71150 is smaller. The eight-piece PP71152 is noted as including a front-front pillar piece, and the ten-piece PP71153 as including a front-front-front pillar piece. This six-piece kit has no coverage note in the catalog, and the data does not say which posts its six covers dress. Comparing the photos is the reliable way to see the difference.
Family-friendly upgrade
Six covers are enough to make the stainless clearly visible on the side of the van while keeping it tasteful. It is a middle-ground choice for owners who want a noticeable improvement without the fullest kit.
Fitment details
Toyota Sienna, 4-door minivan, model years 2021 through 2026. The Fitment tab shows the record. If your Sienna is older than 2021, this kit is not listed for it.
Polished 304 stainless
Every piece is produced in the USA from 304 stainless steel at 26 gauge and polished to a mirror shine. No plating means no flaking and a consistent finish across all six covers.
Tape mounting
The six Sienna covers are held by 3M automotive-grade acrylic foam tape directly on the existing surface, and you will not need to remove anything. According to QAA, that tape holds for a lifetime without harming the minivan.
Install checklist
- Pick a dry, mild day and work in the shade.
- Wash, dry, and de-wax each Sienna pillar.
- Lay the six Sienna covers out and match them to the photos.
- Dry-fit each piece and check it against the photos.
- Peel and press firmly end to end; skip washing for a few days.
The Installation tab has the complete method.
Keeping the Sienna covers even
Fit the first cover on the van and use it as the pattern for the rest. Step back after each piece. Consistent lines from front to back make the biggest difference to the finished look.
Cleaning
Rinse to remove grit, then wash with mild soap and dry with a soft towel. Avoid scouring pads and abrasive polishes on the mirror finish.
What the pillars are
The pillars are the vertical posts between and around the side windows. They support the roof and break up the glass into sections. Polished covers turn each post into a bright border. The trim is cosmetic only, and the original pillars remain underneath.
Before you order
Check the model year on your registration, since this kit is listed from 2021 onward. Then picture how much stainless you want on the side of the Sienna. Looking at the four listings together, from four pieces up to ten, is the quickest way to make that call.
Six or more?
If the front pillar pieces noted on the eight and ten-piece kits interest you, compare those listings before ordering. Each kit is a complete set.
Reference
Part number PP71151, UPC 840251601874. Call Quality Automotive Trims at 877-752-3811 for help or questions.
PP71151 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP71151 |
| UPC | 840251601874 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2026 Toyota Sienna |
Fitment: PP71151
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2021-2026 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2026 Toyota Sienna
- PP71150: 4-piece Pillar Post Trim
- PP71152: 8-piece Pillar Post Trim
- PP71153: 10-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP71151 Pillar Post Trim
How many pieces are in PP71151?
Six polished stainless steel covers.
Which Sienna does it fit?
The 4-door Toyota Sienna minivan, 2021-2026.
Does it include the front pillar pieces?
The catalog notes front pillar pieces only on PP71152 (front-front) and PP71153 (front-front-front).
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
Where is it made?
In the USA, from polished 26-gauge 304 stainless steel.
