Product Description
Ten-Piece Lexus RX350 Pillar Kit Including Front Pillar at Mirror (PP73128)
PP73128 is QAA's largest pillar kit for the Lexus RX350, and its catalog note sets it apart: it includes the front pillar at the mirror. Ten pieces of mirror-polished 304 stainless steel, made in the USA, are listed for the 4-door RX350 SUV, model years 2023 through 2026.
Why the front pillar note matters
Smaller pillar kits often leave the area by the side mirror bare. This kit is noted as covering the front pillar at the mirror, so the bright trim reaches forward to the front of the side glass. That is the one coverage detail QAA's data gives for this set.
Where it sits among the RX350 kits
PP73125 has four pieces and PP73126 has six, and neither has a coverage note. PP73127 has eight and is noted as including a rear triangle piece. This kit has ten. Its note does not mention the rear triangle, and the data does not say whether one is included, so if that area matters to you, call before ordering rather than assume.
Specifications
- Ten pieces
- Includes front pillar at mirror
- 304 stainless steel, 26 gauge, mirror polished
- RX350 covers made in the USA
- UPC 840251602536
Attachment
The ten RX350 pillar pieces, front pillar at the mirror included, go on over the existing surface with 3M automotive-grade acrylic foam tape, and no trim is removed. QAA says the tape will hold for a lifetime without harming the Lexus.
A careful ten-piece install
Set aside time on a dry day with mild temperatures. Clean every pillar and the area by the mirror with soap and water, dry thoroughly, and strip wax with a residue-free wipe. Match the ten RX350 covers to the photos. Dry-fit each piece with the liner in place. Start with the larger pillar covers, then fit the front pillar piece so it lines up with them. Peel and press firmly along the full length. Fit them one at a time, and wait a few days before washing. The Installation tab has the full process.
Working near the mirror
Fold the mirror in if it gives you more room, and take care not to bump the polished face against the mirror housing while positioning the piece.
Why solid stainless
The mirror finish is polished into the steel. There is no plating that can lift, so all ten pieces keep a consistent look.
Fitment
Lexus RX350, 4-door SUV, 2023-2026. See the Fitment tab for the full record.
Care
Mild soap, a gentle rinse, and a soft towel. Avoid abrasives.
Is the largest kit right for you?
If you want polished stainless to run from the mirror back along the side glass, the ten-piece kit is the one with a note that reaches the front. If you would rather keep the front of the window plain, the eight-piece kit with its rear triangle piece suits that. Each RX350 kit is a complete set, so pick the coverage you want up front. Confirm your model year on the registration before ordering, and ask the owner if the kit is a gift.
Contact
For questions about PP73128 or what each RX350 kit covers, call Quality Automotive Trims at 877-752-3811.
PP73128 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP73128 |
| UPC | 840251602536 |
| Part type | Pillar Post Trim |
| Pieces in kit | 10 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Coverage / notes | Includes Front Pillar at mirror |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2023-2026 Lexus RX350 |
Fitment: PP73128
| Vehicle | Years | Body style |
|---|---|---|
| Lexus RX350 | 2023-2026 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2023-2026 Lexus RX350
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 10 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP73128 Pillar Post Trim
Which vehicle does PP73128 fit?
The 4-door Lexus RX350 SUV, 2023-2026.
What does it include?
Ten pieces, including the front pillar at the mirror, according to QAA's catalog note.
Does it include the rear triangle piece?
The note for this kit does not mention it. The rear triangle piece is noted on PP73127. Call us to confirm.
How does it attach?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Phone number?
Quality Automotive Trims, 877-752-3811.
