Product Description
Most Complete Venza Pillar Set: 12 Mirror-Polished Stainless Pieces, 2021-2024 (PP71159)
PP71159 is the top of QAA's Toyota Venza pillar range. Twelve polished stainless steel covers are listed for the 4-door Venza crossover SUV, model years 2021 through 2024, for owners who want the most pillar trim QAA offers for this vehicle.
A twelve-piece set
This listing's title gives 12Pc, the count QAA uses on its own product page, in the name and under Number of Pieces. Every other Venza listing calls this the twelve-piece kit too. If you'd like to go over the contents, call QAA at 877-752-3811.
Twelve, explained honestly
Twelve is the highest count among the five Venza kits. The catalog does not map which posts each piece dresses, and it attaches no coverage notes to the Venza range, so we will not promise coverage of any particular area beyond what the photos show. What is certain is that this kit carries the most stainless of the five.
Smaller alternatives
PP71155 (four), PP71156 (six), PP71157 (eight), and PP71158 (ten) all share this fitment. Each kit is a complete set, so you would choose one rather than combine them.
Fitment
Toyota Venza, 4-door crossover SUV, model years 2021 through 2024. The Fitment tab shows the entry as cataloged.
Why solid stainless
All twelve covers are made in the USA from 304 stainless steel at 26 gauge and polished to a mirror finish. Because there is no plating, the brightness does not depend on a surface layer, and every piece looks the same.
Mounting
On the Venza, 3M automotive-grade acrylic foam tape holds the covers directly to the existing surface, so the original trim stays put. Per QAA, the tape lasts a lifetime and does not damage the crossover's surface.
Taking on a twelve-piece install
It is not difficult, but it does reward organization. Lay the twelve Venza covers out in the order you plan to fit them. Clean, dry, and de-wax the pillars. Dry-fit every cover before peeling, then press firmly along the full length. Press one, step back, and line up the next with it. Choose a dry, mild day, and avoid washing for a few days afterward. The Installation tab has the step-by-step instructions.
The finished look
Pillars are the vertical posts around the side glass. With twelve polished covers, the windows gain a bold, continuous stainless frame. The covers are cosmetic and sit over the original surface, which is left intact.
Keeping it bright
Rinse, wash with mild soap, and dry with a soft towel. Keep abrasive pads and harsh chemicals off the mirror finish so it stays clear.
Is this the right kit?
If you want the boldest pillar look QAA catalogs for the Venza, yes. If you would rather keep things lighter, the eight or ten-piece kits are good alternatives. Compare the photos before you decide, and keep in mind that the twelve-piece kit makes the pillars the main event on the side of the vehicle.
Reference
Part number PP71159, UPC 840251601454. The Specs tab lists material and gauge. Call Quality Automotive Trims at 877-752-3811 for help.
PP71159 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP71159 |
| UPC | 840251601454 |
| Part type | Pillar Post Trim |
| Pieces in kit | 12 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2021-2024 Toyota Venza |
Fitment: PP71159
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Venza | 2021-2024 | 4-door, Crossover SUV |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2021-2024 Toyota Venza
- PP71157: 8-piece Pillar Post Trim
- PP71155: 4-piece Pillar Post Trim
- PP71156: 6-piece Pillar Post Trim
- PP71158: 10-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 12 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP71159 Pillar Post Trim
Is PP71159 the largest Venza pillar kit?
Yes. QAA's data lists twelve pieces, the most of the five Venza kits.
Is the count in the title correct now?
Yes. It reads 12Pc, the same as QAA's website.
What does it fit?
The Toyota Venza 4-door crossover SUV, 2021-2024.
How is it installed?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Polished 26-gauge 304 stainless steel, made in the USA.
