Product Description
1992-1995 Honda Civic Sedan Four-Piece Stainless Pillar Covers (PP92214)
PP92214 brings four mirror-polished stainless steel pillar covers to the 4-door Honda Civic sedan from model years 1992 through 1995. The pieces are made in the USA from 304 stainless and attach with 3M tape.
Sedan fitment
This kit is listed for the 4-door sedan only. QAA links two Civic rocker kits to it, and one of them is for the 2-door coupe, so check body styles as you shop. If your Civic is not the sedan, this pillar kit is not listed for it; call before ordering.
Rocker kits nearby
- TH92214: six-piece upper rocker kit for the 4-door sedan, coverage between the wheel wells only, from the bottom of the molding down
- TH92212: six-piece upper rocker kit for the 2-door coupe
If you want lower trim too, TH92214 is the sedan version; check its listing for the finish. Check its own page for years.
Coverage
The pillar kit has no coverage note in QAA's data, so the catalog does not say which posts the four covers dress. The photos show the pieces.
Material
26-gauge 304 stainless steel with a mirror polish. The finish is the steel, so there is no coating to peel.
Mounting
The four Civic covers fit over the existing surface with 3M automotive-grade acrylic foam tape. Per QAA, it will hold for a lifetime and won't mark the Honda.
Prep and install
Wash the pillars, dry them, and use a wax-free cleaner to remove old polish; on a car of this age, that step matters. Repair any flaking paint where a cover will sit. On a dry, mild day, dry-fit each cover with the liner on, compare with the photos, then peel and press firmly along the full length. Fit one Civic cover and match the next to it. Avoid washing for a few days. See the Installation tab for detail.
Model years
Honda Civic, 4-door sedan, 1992, 1993, 1994, and 1995. The Fitment tab shows the record.
Why polished pillars
A bright cover gives the side glass a clean outline and leaves the original pillar untouched. It is a cosmetic refresh for a daily driver or a car being tidied up.
Placement tips
Four covers are easy to see, so take your time with the first one. Set it, step back, and look along the car from the front and rear before pressing it down hard. Then place the next to match, using the door edge and window corner as reference points. Keep fingertips off the exposed adhesive, since skin oil weakens the bond.
The steel, explained
304 is a widely used grade of stainless for exterior bright trim. Because these covers are stainless throughout, a scuff does not reveal a different material underneath the way it can with plated plastic.
Care
Mild soap, a rinse, and a soft towel. Keep abrasive pads off the mirror finish.
Before ordering
Confirm the year and body style on your registration, and if you are also buying rocker trim, check that kit's years on its own page.
Part details
The 1992-1995 Civic set PP92214 (UPC 691821716401) has four covers, and 877-752-3811 answers fit questions on it.
PP92214 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP92214 |
| UPC | 691821716401 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1992-1995 Honda Civic |
Fitment: PP92214
| Vehicle | Years | Body style |
|---|---|---|
| Honda Civic | 1992-1995 | 4-door, Sedan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1992-1995 Honda Civic
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP92214 Pillar Post Trim
What does PP92214 fit?
The 4-door Honda Civic sedan, 1992-1995.
Does it fit the Civic coupe?
No. This pillar kit is listed for the 4-door sedan only.
Is there a matching rocker kit?
TH92214 is the sedan upper rocker kit listed with it.
How does it install?
With 3M automotive-grade acrylic foam tape over the existing surface. QAA states the tape will hold for a lifetime without causing damage to the vehicle.
What is it made of?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
Phone number?
Quality Automotive Trims, 877-752-3811.
