Product Description
BMW 7 Series Four-Piece Stainless Pillar Covers, 1995-2001 Sedan (PP95917)
A big BMW sedan from the late nineties already carries plenty of presence, and polished pillars are a quiet way to sharpen the side profile without changing anything permanent. PP95917 is a set of four mirror-polished stainless steel pillar post covers that QAA lists for the 4-door BMW 7 Series sedan from 1995 through 2001.
What you are buying
Four covers cut from 304 stainless steel in 26 gauge, made in the USA. The shine comes from polishing the metal itself rather than from a plated layer, so there is no chrome skin that can peel or haze over time. Each cover mounts with 3M automotive-grade acrylic foam tape.
The fitment, plainly
The catalog record names one vehicle: the BMW 7 Series, 4-door sedan, model years 1995, 1996, 1997, 1998, 1999, 2000, and 2001. Nothing else is listed. If your car is a different body or falls outside that range, this kit is not cataloged for it, and the Fitment tab is the place to double-check.
Four pieces or six?
QAA offers a second pillar kit for the same sedan, PP95918, with six pieces. The data has no coverage note on either one, so it does not spell out which posts these four dress or where the six-piece set puts its two further covers. The product photos are the best guide, and a quick phone call settles any doubt.
The 7 Series trim stays in place
These covers sit on top of the existing pillar surface. You do not pull interior panels, and you do not remove any original trim. QAA states the tape will hold for a lifetime without causing damage to the vehicle surface.
Getting an older finish ready
Paint that has seen two decades of sun and polish often carries layers of wax and glaze. Tape bonds best to bare, sound clearcoat, so wash the pillars, let them dry fully, and wipe them with a cleaner that leaves no film. If the paint is lifting or chalky anywhere, deal with that first; the adhesive can only be as strong as what it sticks to.
Fitting the four covers
Pick a dry day with mild temperatures and work out of direct sun. Lay the covers out, match left to right, and hold each against its pillar with the liner still in place. When the edges line up with the door frame and glass, peel the liner and press from one end to the other with firm, even pressure. Fit two covers, walk around to compare, then fit the other two. Give the bond a few days before the first wash. Full steps are on the Installation tab.
Keeping the shine
Soap, water, a rinse, and a soft towel are all the steel needs. Skip scouring pads and gritty compounds, which leave fine scratches in a mirror surface.
A light, reversible upgrade
Because the original pillars stay untouched underneath, this is an easy change for owners who care about keeping the car close to how it left the dealer while still giving it some sparkle.
Reference numbers
SKU PP95917, UPC 691821686872. Questions about fit or the four-versus-six choice can go to Quality Automotive Trims at 877-752-3811.
PP95917 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP95917 |
| UPC | 691821686872 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 1995-2001 BMW 7 Series |
Fitment: PP95917
| Vehicle | Years | Body style |
|---|---|---|
| BMW 7 Series | 1995-2001 | 4-door, Sedan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 1995-2001 BMW 7 Series
- PP95918: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP95917 Pillar Post Trim
Which BMW does PP95917 fit?
The 4-door BMW 7 Series sedan, model years 1995 through 2001.
How many covers are in the kit?
Four. QAA also lists PP95918, a six-piece kit for the same sedan.
What is the difference between the four and six-piece kits?
The catalog data does not describe which posts each kit covers. Compare the photos or call 877-752-3811.
Do I need to remove the factory pillar trim?
No. The covers mount over the existing surface with 3M automotive-grade acrylic foam tape.
What material is used?
Mirror-polished 26-gauge 304 stainless steel, made in the USA.
