Product Description
PP24150: Four Stainless Pillar Post Covers for the 2004-2010 Toyota Sienna
PP24150 is the four-piece pillar set for the 2004-2010 Toyota Sienna minivan. Four polished stainless covers, $67.99, made in the USA. You'll see two other Sienna pillar sets linked to it, a six-piece (PP24151) and an eight-piece (PP24152), and choosing among the three is most of what this page is about.
Start with what the listings actually tell you. This one and the six-piece set say nothing beyond the count: no pillar names, no widths, no notes. The eight-piece set is different in one respect. Its listing carries the note "Includes Rear Triangle piece." That note appears only on the eight-piece listing, so don't read it as describing this set; the four-piece listing doesn't mention a triangle piece at all. If a rear triangle piece matters to you, look at the eight-piece set's page and photos, or call Quality Automotive Trims on 877-752-3811 and quote PP24150.
Beyond that, the photos are your guide. Open the three galleries and compare them. Decide which areas of your Sienna you'd like dressed in polished steel, then choose the set whose photos match. Four covers is the shortest job. The Sienna gallery shows the four covers; we'll confirm on 877-752-3811.
The fitment row reads Toyota Sienna, 2004-2010, 4-door, Minivan, spanning seven model years. Check the Sienna dates from 2004 through 2010. A rocker panel trim kit, TH24150, is linked too, but it's a separate product with its own page.
The covers are 26 gauge 304 stainless steel, polished. That grade resists corrosion and needs no plating, so there's no surface layer to flake off, and washing is all the upkeep it needs. They attach with 3M automotive-grade acrylic foam tape directly over the existing surface. There's no drilling and no trim to remove. The Installation tab lists the tape's temperature range and cure time.
Because the tape grips the finish already on the posts, have a careful look at each one first. On a minivan from these years, a chalky haze, fine cracking or a lifting edge should be fixed before fitting. Draw a fingertip along each post; if it picks up a dusty residue, the surface needs more attention. A firm, smooth finish just needs a good clean.
For the fitting, wait for a dry, calm day and work in the shade. Unpack the four covers and compare each with the photos, calling if one is bent or missing. Wash and dry the posts, then wipe them with isopropyl alcohol until a fresh lint-free cloth comes away clean. Hold the Sienna covers next to the gallery images. Dry-fit each one with its liner on and outline it with painter's tape. Then peel, place and press firmly along the full length and both edges, and fit the next cover straight after. A step stool helps if the upper edges are hard to see from the ground.
If one of the Sienna's four covers won't lie flat, leave its liner on and call 877-752-3811. After the cure time, wash with car soap and dry with a soft towel. There's no need to rush the minivan.
PP24150 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP24150 |
| UPC | 691821627172 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2004-2010 Toyota Sienna |
Fitment: PP24150
| Vehicle | Years | Body style |
|---|---|---|
| Toyota Sienna | 2004-2010 | 4-door, Minivan |
Check your vehicle against every column here: year range, model, and body style all have to match. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2004-2010 Toyota Sienna
- PP24151: 6-piece Pillar Post Trim
- PP24152: 8-piece Pillar Post Trim
- TH24150: 8-piece Rocker Panel Trim, Lower Kit
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP24150 Pillar Post Trim
What does PP24150 fit?
The 2004-2010 Toyota Sienna, 4-door Minivan.
How many covers?
Four. PP24151 has 6 & PP24152 has 8.
Does this set include a rear triangle piece?
Its listing doesn't mention one. That note is on PP24152 only.
Which pillars are covered?
The listing doesn't say. Compare the photos or call 877-752-3811.
Is drilling needed?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
