Product Description
Hyundai Tucson 2010-2015 Pillar Post Trim, 4-Piece Polished Stainless (PP10350)
Three pillar post sets are listed for the 2010-2015 Hyundai Tucson 4-door SUV, and PP10350 is the entry point: four pieces of polished 26 gauge 304 stainless steel, made in the USA. The other two are PP10351 with six pieces and PP10352 with eight. All three carry the same fitment row and title years, and none of them carries a note. So the decision between them is purely about coverage, and the product photos are where that coverage is shown.
How to compare the three
- PP10350, four pieces: the fewest parts to place and the quickest install.
- PP10351, six pieces: two more pieces than this set.
- PP10352, eight pieces: the most pieces of the three.
The record doesn't name the pillars in any of them. Flip through each listing's photos, then look at your Tucson's window frame and decide which pillars you want in stainless. Quality Automotive Trims can help at 877-752-3811; mention PP10350.
Fitment
Hyundai Tucson, 2010 through 2015, 4-door, SUV. PP10350 is for 2010 to 2015 Tucsons. Tucson pillar prep is on the Installation tab, including the working temperature range and the cure time before washing. Ring 877-752-3811 with PP10350 for Tucson questions.
Mounting
3M automotive-grade acrylic foam tape, installed directly over the existing surface. You won't drill, and nothing is taken off the vehicle. Take care cleaning the pillar faces, then let them dry fully. No width is listed.
Prep for a lasting bond
Pillars beside the glass tend to carry residue from window cleaner as well as ordinary road film. Wash them with soapy water, dry them, then wipe with rubbing alcohol on a clean cloth and let it flash off. If wax or a sealant is present, remove it where the tape will sit. Chips or a peeling finish should be repaired before you start.
Installing four pieces
With the photos open, hold each piece up to its pillar, liner still on. When it matches, write its position on the liner. Then work through them one by one: peel, align with the pillar's edges, and press firmly along the whole piece. Finish each with a fingertip run down both edges. Stand back and look over all four covers when you're done. A dry day inside the temperature range in the Installation tab is ideal, and the tab also lists the cure time to observe before washing. The four covers are stainless.
Light, weather and timing
Glare from glass and polished steel can hide a crooked edge, so work in open shade or a bright garage rather than direct sun. Skip cold, damp or very hot days. Leave plenty of time for cleaning and the dry fit, so nothing is rushed at the pressing stage.
Upgrading later
If you start with four pieces and later want more, the larger sets' photos show what they include; call before ordering a second set.
Care
Wash with mild soap and water and dry with a soft cloth. Avoid abrasive pads and steel wool on the polish.
PP10350 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10350 |
| UPC | 691821345847 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Hyundai Tucson |
Fitment: PP10350
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Tucson | 2010-2015 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Hyundai Tucson
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10350 Pillar Post Trim
What does PP10350 fit?
The 2010-2015 Hyundai Tucson 4-door SUV.
What other pillar sets are there?
PP10351 (six pieces) and PP10352 (eight pieces), same fitment.
How many pieces in PP10350?
Four.
Will I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Which pillars are covered?
The listing doesn't say in words. See the photos or call 877-752-3811.
