Product Description
PP10351: Hyundai Tucson 2010-2015 Stainless Pillar Post Trim, Six Pieces
What is it? Six pieces of pillar post trim, cut from 26 gauge 304 stainless steel with a polished finish and made in the USA, for the 2010-2015 Hyundai Tucson 4-door SUV. The pieces lay over the existing pillar surfaces and attach with 3M automotive-grade acrylic foam tape.
Where does it sit in the lineup? In the middle. This sheet also lists PP10350 with four pieces and PP10352 with eight, all with the same fitment tags. None of the three has a note naming its pillars, so the product photos are the reference. A six-piece set suits a buyer who wants more than the four-piece coverage but not the full eight. Compare all three listings' photos and pick by eye. Unsure? Quality Automotive Trims answers at 877-752-3811; quote PP10351.
Is it tagged for my Tucson? The single row reads Hyundai Tucson, 2010-2015, 4-door, SUV. The title gives the same years. For six Tucson covers, the car must be a 2010-2015 model. Give PP10351 when you phone 877-752-3811.
Do I drill anything? No. The tape installs directly over the existing surface. We'll go over Tucson fit with you there, and help compare these six covers with the smaller set. It also lists no width.
What should I have on hand? Soapy water and a sponge, clean microfiber towels, rubbing alcohol, a roll of painter's tape, a marker, and the product photos on a phone or tablet.
How should I prepare? Wash the pillars, dry them, and wipe them with rubbing alcohol, letting it evaporate before you continue. Any wax or sealant in the contact area must come off. A chipped or lifting finish should be fixed first, because the tape grips whatever is underneath it, and a weak surface means a weak bond.
How do I keep six pieces in order? Arrange them on a towel front to back, matching the photos. Test each against its pillar with the liner on and label it. If one won't sit right, try it on another pillar; similar pieces are easy to mix up.
What's the install sequence? Complete three covers in a row first. Peel a liner, line the piece up with the pillar edges, and press firmly from one end to the other, then run a fingertip down both edges. Move to the next piece. Step back and check those three before starting the rest. When both are done, compare them from a few steps away. Install on a dry day within the Installation tab's temperature range and wait the listed cure time before washing.
When is the best time? A dry, mild day, in shade or a well-lit garage. Direct sun on glass and stainless creates glare that hides small misalignments, and cold or damp conditions work against the tape. Plan the session so you never feel hurried while pressing.
How do I look after it? Mild soap, water and a soft cloth. No steel wool, abrasive pads or gritty polish. Wipe glass cleaner off the stainless if it drifts onto it.
PP10351 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP10351 |
| UPC | 691821740062 |
| Part type | Pillar Post Trim |
| Pieces in kit | 6 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2010-2015 Hyundai Tucson |
Fitment: PP10351
| Vehicle | Years | Body style |
|---|---|---|
| Hyundai Tucson | 2010-2015 | 4-door, SUV |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2010-2015 Hyundai Tucson
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 6 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP10351 Pillar Post Trim
What does PP10351 fit?
The 2010-2015 Hyundai Tucson 4-door SUV.
How many pieces?
Six.
What are the other pillar options?
PP10350 with four pieces & PP10352 with eight.
Is drilling required?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
What's it made of?
Polished 26 gauge 304 stainless steel, made in the USA.
