Product Description
Honda Odyssey 2011-2017 Minivan Pillar Post Trim, 4-Piece Polished Stainless (PP11245)
PP11245 is a four-piece stainless pillar post set for the Honda Odyssey, model years 2011 through 2017, tagged 4-door minivan. It has one companion on this sheet, PP11246, a six-piece set with the same row. Neither listing has notes or names the pillars it covers, so the product photos are what you compare.
Which one? If the pillars in this set's photos are the ones you want in stainless, the four-piece set is the simpler, quicker job. If the six-piece photos include a pillar you'd also like covered, consider PP11246. The catalog doesn't say whether the two overlap, so choose one rather than both. For help, call Quality Automotive Trims at 877-752-3811 and give us PP11245.
Fitment. Honda Odyssey, 2011-2017, 4-door, minivan. The title agrees. PP11245 covers Odysseys from 2011 to 2017. Odyssey owners with a fit doubt can ring 877-752-3811.
Material. Polished 26 gauge 304 stainless steel, made in the USA. No width is listed.
Mounting. 3M automotive-grade acrylic foam tape, installed directly over the existing surface. No drilling and no removal of anything on the van. Getting the Odyssey's pillars ready is a matter of following the Installation tab.
Prep. Hands, window cleaner and road film all leave residue around the glass. Sponge the pillars with soapy water, rinse and towel dry, then wipe with rubbing alcohol on a lint-free cloth and let it evaporate. Take any wax, sealant or coating off the contact area. Repair chipped or flaking finish before going further.
Dry fit. Compare each piece with the photos and offer it to its pillar with the backing on. When the outline follows the pillar's edges, write the location on the backing and put a short strip of painter's tape at each end on the van. A piece that seems wrong may belong on a different pillar; try it there first.
Install. Peel one backing, place the piece between its marks, and press firmly from end to end, then run a fingertip along both edges. Do the rest the same way, then look over the set from a few steps back. A small step stool helps you see the upper ends squarely. Work on a mild, dry day within the Installation tab's range and wait the listed cure time before washing.
Light. Glare off glass and polished steel hides small misalignments. Open shade or a well-lit garage is the best place to judge the margins.
If you're stuck. Don't peel a piece that won't line up. Recheck it against the photos and the other pillars first, then take a photo of it held in place and call us; we'll help you sort it out before anything is stuck down.
What to gather. A sponge and bucket, microfiber towels, rubbing alcohol, painter's tape, a marker for the backings and the product photos on a phone or tablet. Having everything within reach keeps the install moving once you start peeling.
Upkeep. Mild soap and water on a soft cloth. No scouring pads or steel wool.
PP11245 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP11245 |
| UPC | 691821353309 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2011-2017 Honda Odyssey |
Fitment: PP11245
| Vehicle | Years | Body style |
|---|---|---|
| Honda Odyssey | 2011-2017 | 4-door, Minivan |
Fitment is listed exactly as QAA catalogs it. Confirm the body style as well as the year and model. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2011-2017 Honda Odyssey
- PP11246: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP11245 Pillar Post Trim
What does PP11245 fit?
The 2011-2017 Honda Odyssey 4-door minivan.
Is there a six-piece set?
Yes, PP11246 with the same fitment.
How many pieces?
Four.
Do I need to drill?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Which pillars are covered?
The listing doesn't name them. Compare the photos or call 877-752-3811.
