Product Description
Lexus ES350 2013-2018 Sedan Pillar Posts, Four Polished Stainless Covers (PP13106)
For the Lexus ES350 4-door sedan, model years 2013 through 2018, PP13106 supplies four pillar post covers in polished 26 gauge 304 stainless steel, made in the USA. The title and the single fitment row match on model, years and body.
Note the model name on the row: ES350. The listing names that model specifically, so check your records or the badge on the car. If you have a different ES variant, the row doesn't list it, and a quick call to Quality Automotive Trims at 877-752-3811 is the way to find out more. Quote PP13106.
Size choice. The sheet shows one alternative, PP13107, with six pieces. Neither has a note, and neither names its pillars, so you'll compare by photos. Here's a simple method: put the six-piece and four-piece photos side by side and note any shapes that appear in one but not the other. Find where those would go on your car. If you want those spots covered, buy the six. If not, these four keep the job shorter. The catalog doesn't say whether the sets overlap, so buy only one.
Years. 2013 to 2018, six model years. PP13106 covers the ES350 from 2013 to 2018.
Attachment. The ES350's four covers are held by 3M automotive-grade acrylic foam tape on the existing pillar surface, with nothing drilled or removed. Unsure about your ES350? The ES350 pillar team is at 877-752-3811.
Surface prep. Wash with a pH-neutral car soap and water, rinse, and dry with a clean towel. Follow with a wipe of isopropyl alcohol on a lint-free cloth and let it evaporate. Any wax, sealant or ceramic coating where the tape will sit should come off. If you find chips or lifting finish, put those right first.
Dry run. Hold each cover to its pillar with the liner still on. Compare it with the photos and look along both long edges. If they don't follow the pillar, try the cover on another pillar. When it sits right, mark both ends with small pieces of painter's tape and note the location on the liner.
Final fit. Peel one liner, set the cover between its marks, and press it down firmly from one end to the other. Go over both edges with your thumb. Repeat for the others, then compare all four from a few steps back. The Installation tab lists the temperature range for the tape and the cure time before washing.
Lighting. Reflections from polished steel and glass make small misalignments hard to see in sunlight. A garage or shaded spot works best.
Tools. Bucket, soap, towels, isopropyl alcohol, a lint-free cloth, painter's tape, a pen and the photos on a phone.
Upkeep. Clean with mild soap on a soft cloth; abrasive pads can scratch.
This listing's data is shown on the Fitment and Specs tabs.
If stuck. Keep the liner on any cover that won't sit right, photograph it held in place and call us. Order of work. Place two ES350 covers, then line the other two up with them.
PP13106 specifications
| Brand | QAA |
|---|---|
| Part number (MPN) | PP13106 |
| UPC | 691821747801 |
| Part type | Pillar Post Trim |
| Pieces in kit | 4 |
| Material | Polished 26-gauge 304 stainless steel |
| Finish | Polished to a mirror shine |
| Mounting | 3M automotive-grade acrylic foam tape; installs directly over the existing surface |
| Origin | Made in the USA |
| Fits | 2013-2018 Lexus ES350 |
Fitment: PP13106
| Vehicle | Years | Body style |
|---|---|---|
| Lexus ES350 | 2013-2018 | 4-door, Sedan |
Match the year, model, and body style in this table to your vehicle before ordering. Questions? Call Quality Automotive Trims at 877-752-3811 with your year, make, model, and body style.
Other QAA trim cataloged for the 2013-2018 Lexus ES350
- PP13107: 6-piece Pillar Post Trim
Check the body style on each listing; some kits are specific to one body style.
Installation tips: Pillar Post Trim
- Unpack all 4 pieces and match each one to its position on the vehicle, using the product photos, before fitting any of them.
- Each piece mounts with 3M automotive-grade acrylic foam tape, so clean and dry the mounting surface first; the tape needs paint or trim free of dirt and wax.
- Align the piece and press it firmly into place directly over the existing surface, working along its full length so the tape bonds evenly.
- Fit one piece at a time and compare each with the product photos and the pieces already in place.
These are general tips. Follow any instructions packed with your kit if they differ.
FAQ: PP13106 Pillar Post Trim
What does PP13106 fit?
The 2013-2018 Lexus ES350 4-door sedan.
Is there a six-piece set?
Yes, PP13107 for the same car.
Which pillars are covered?
The listing doesn't name them. Compare the photos or call 877-752-3811.
Is drilling required?
No. It mounts with 3M automotive-grade acrylic foam tape directly over the existing surface.
Does it fit other ES models?
The row lists the ES350 only. Call 877-752-3811 about other models.
